Skip to product information
1 of 3

(West Germany)

Vintage, 1970s, Echtes Leder

Vintage, 1970s, Echtes Leder

Regular price $66.00
Regular price Sale price $66.00
Sale Sold out
Shipping calculated at checkout.
Size
Color
This is a hip-length black leather leisure jacket, probably made in 1970–1979 from fine sheep-family nappa, with lambskin the stronger species diagnosis. A four-button single-breasted front, broad notched revere, chest yoke, pointed buttoned breast-pocket flaps, and elongated vertical welt mouths combine sport-coat architecture with a utility-jacket front. The straight body and moderately extended shoulder line distribute ease through the upper torso, while the soft skin permits the lower panels to fall with little outward support. Its safari relationship lies in pocketed leisure outerwear, but the absence of a belt, epaulets, and bellows pockets keeps the classification outside the true safari-jacket type. The jacket occupies the same 1970s field in which leather, broad lapels, and hybrid tailored-casual forms became prominent, as documented by The Metropolitan Museum of Art’s Pierre Cardin leather jacket, object 2009.300.7869, and Los Angeles County Museum of Art’s Pierre Cardin man’s suit, M.2012.5.20a-b. I. Designer, House, Maker Origin & Historical Profile The manufacturer is unknown. No maker or retail label is present at the neck, and no separate documentary label information is recorded. The leather hanging loop is solely a suspension component. There are no stitch scars, fragments, or tonal traces that establish a removed label. The black four-hole buttons are unmarked components, and neither their form nor their placement supplies maker-specific evidence. Manufacturing origin is unresolved. The notched revere, four-button front, broad collar, sectional leather cutting, plastic buttons, and black woven lining do not sustain a national assignment. The Metropolitan Museum of Art’s French Pierre Cardin leather jacket, 2009.300.7869, and American Bill Blass Ltd. leather jacket, 1985.361.1, document transatlantic use of leather for fashion jackets during the decade, but neither establishes constructional origin for this object. Western European and North American manufacture remain plausible hypotheses, and the surviving evidence does not separate them. The market category is more legible than the source. Button placement, torso block, and shoulder breadth are consistent with period menswear, yet those features are not exclusive, and no recorded gender classification survives. The stable identification is a leather leisure jacket: a civilian hip-length outer layer in which tailored collar architecture and multiple front pockets carry equal weight. II. Brand Heritage, Fashion-Historical Position & Industry Influence The relevant history is the late-1960s and 1970s expansion of leather beyond specialist flying and motorcycle forms into jackets derived from sport coats, shirts, field clothing, and safari dress. The Metropolitan Museum of Art’s Recent Acquisitions: A Selection 1986–1987 states that leather was popular in the late 1960s and early 1970s and records several period leather ensembles; the observation concerns a documented fashion field, not the origin of this example. Here the broad revere, small dress-type buttons, long body, and absence of heavy metal hardware place the jacket within civilian leisure outerwear. Period garment-leather manufacture depended on skilled hide selection, economical nesting, component cutting, machine sewing, lining assembly, and controlled surface finishing. The United Nations Industrial Development Organization’s Leather Garment Manufacturing technical report of 15 November 1979 describes centralized cutting and preparation, specialized sewing lines, operator division by operation, and jackets assembled from smaller skin components. That report addresses an Ethiopian industrial project and does not establish this jacket’s origin; it is valuable as contemporaneous evidence for the production problems evident in this object, particularly the sectional fronts, narrow edge allowances, and extensive topstitching used to stabilize soft skins. The jacket is historically representative at the product level: it shows how serial leather manufacture could merge a tailored revere with an organized utility-pocket facade while omitting the zippers, snaps, gussets, and protective closures of specialist riding clothing. Its distinction lies in that conjunction, not in a claim of innovation. III. Garment Classification & Design Intent The primary type is a leather leisure jacket with a single-breasted, four-button front and a notched collar-and-revere system. It is not a conventional blazer: the horizontal chest seam, pointed buttoned breast-pocket flaps, long vertical pocket welts, and sectional skin panels give the facade the storage structure of casual outerwear. It is not a shirt jacket because the front is drafted to roll open through a lapel breakpoint and the collar has a tailored fall. It is not a car coat because the length remains within jacket proportions and the front lacks the simplified weather closure typical of that class. The design resolves three practical demands. The relatively long body provides hip coverage; the moderately extended shoulder and straight side line admit a shirt or light knit layer; and four accessible front pockets divide small carried items between the upper and lower torso. Leather supplies wind resistance and modest abrasion protection, while the open revere permits ventilation and accommodates collared underlayers. The jacket has no specialist protective system. There is no asymmetrical zipper, throat latch, storm flap, close cuff, waistband, action pleat, impact reinforcement, or belt. Its intended performance was ordinary civilian outerwear use in cool, dry conditions. The utility vocabulary is visual and organizational, not evidence of military issue, field specification, ranch work, or motorcycle use. IV. Construction Methodology & Engineering The jacket is a cut-and-sew leather construction. The likely sequence began with selection and nesting of skin panels, followed by cutting of front, yoke, back, sleeve, collar, facing, pocket, and reinforcement pieces. Pocket mouths and buttonholes would have been prepared before the main fronts were joined; the horizontal upper-front seam and long vertical panel seams were then assembled and topstitched, the shoulder and side structures closed, the sleeves set, and the collar and front facings attached. The black lining was assembled separately and joined after the shell had acquired its final shape. Machine lockstitching is probable throughout the exterior shell. Parallel rows along the collar, revere, yoke, pocket flaps, front edge, and pocket welts secure turned or lapped leather edges and flatten seam bulk. The even stitch length and repeated spacing support serial machine work. The paired rows need not have been made simultaneously; separate single-needle passes remain possible. The soft skin required local stabilization around buttonholes, pocket mouths, flap buttons, and the revere edge. The collar and lapels hold a definite outline despite the pliant leather, indicating hidden support in the facing or undercollar. The long pocket welts act as both openings and narrow reinforcing bands, spreading repeated hand-entry strain over a larger vertical area. Leather allows little recovery from misplaced needle holes. Assembly therefore depended on accurate first-pass matching, controlled presser-foot feed, and limited correction. The slight compression beside several stitch lines is consistent with the material being drawn under the foot and turned over narrow internal allowances, not with decorative quilting. V. Technical Design Elements & Detailing The upper-body architecture is led by an applied turn-down collar and a notched revere. The collar has a broad fall and extended points; the lapel breaks high enough for the upper button to remain close to the chest-pocket level. This is a genuine collar-and-revere system, not an open shirt collar: the front edge folds back on a sustained roll line and meets the collar at a defined notch. A horizontal seam divides the front at upper-chest level and continues beneath the pocket flaps. The seam reduces the area demanded from any single skin and establishes a yoke-like visual plane without proving a one-piece yoke across the back. Below it, narrow vertical bands organize the pocket system and continue toward the hem. Their placement lengthens the torso and controls local deformation around the openings. Each breast pocket has a broad, downward-pointing flap secured by one four-hole button. The pocket body is integrated closely enough with the surrounding panels that its full boundary is subordinate to the facade. Beneath each flap zone, an elongated vertical welt opening provides hand access. The two pocket levels divide storage by reach: small items can be retained under buttoned flaps, while the vertical openings permit easier standing access. Four small four-hole buttons close the center front through machine-worked buttonholes. Their scale belongs to tailored or shirt-derived outerwear, not heavy field hardware. The plain sleeve hems contain no buttoned cuff, knitted band, or protective tab. A leather loop at the back neck supports hanging and carries no attributional function. VI. Nomenclature and Historical Drift “Leather leisure jacket” is the narrowest stable name. “Leather blazer” understates the pocket and panel structure; “field jacket” would imply a functional field-clothing system absent here; and “motorcycle jacket” would require protective closure, abrasion reinforcement, or riding-specific adjustment. “Safari jacket” is also too strong as a primary classification. A true safari or bush jacket conventionally centers four capacious front pockets, a belt or waist control, epaulets, and a shirt-type collar, commonly in lightweight cloth; GQ’s Dropping Knowledge: The Safari Jacket describes this standard configuration. The safari reference remains historically useful because the object retains the pocketed, long-bodied leisure-outerwear idea while replacing belt, epaulets, and bellows construction with a sport-coat revere and flat pocket architecture. The Philadelphia Museum of Art’s Tailoring Philadelphia records Francis Toscani’s ivory silk safari jacket of about 1967, showing that the safari type had already entered experimental urban menswear before this jacket’s proposed decade. The present object is a later adaptation or convergence: utility organization was retained, while expedition-specific capacity and adjustment were removed. The broad collar and notched lapels connect the jacket to the enlarged tailored proportions around 1970. Los Angeles County Museum of Art’s Pierre Cardin man’s suit, M.2012.5.20a-b, dated about 1970, documents wide notched lapels and a long jacket within menswear tailoring. The comparison supports period vocabulary and proportion; it does not assign designer, nationality, or manufacture to this object. The jacket therefore belongs within safari-adjacent leather leisurewear, a civilian product archetype that combined tailored presentation with overt carrying features. The fieldwear element is typological memory, not an institutional or occupational identity. VII. Fabric Composition & Textile Engineering The shell is genuine garment leather. Its most probable diagnosis is sheep-family nappa, more likely lambskin than adult sheepskin. The evidence is the fine, close, low-relief grain; thin section at turned edges; low mass relative to panel size; soft collapse through the lower front; and small rounded compression wrinkles at the collar, lapels, and pocket flaps. Adult sheepskin remains the second sheep-family possibility but would commonly present looser, less uniform substance. Lambskin fits this object better than calf, which ordinarily has denser body and firmer deformation, or goat, which more often presents greater tensile firmness and a more emphatic pebbled or ridged grain. Adult bovine leather is disfavored by the thin section and modest panel mass, while pigskin is unsupported because characteristic grouped follicles are absent. The diagnosis remains probable. A black surface finish reduces access to natural follicle morphology, and sheep and goat can be difficult to separate even under magnification. Erling Hansen’s Identification of Leather, indexed by the Smithsonian Museum Conservation Institute, identifies hair-follicle pattern as key evidence while warning that sheep and goat may be difficult to distinguish and that treatment can obscure grain. The present convergence supports probable lamb nappa, but not an unqualified species claim. Nappa here denotes a soft, supple garment leather, not a species, tannage, or proof of aniline finishing. The surface is probably pigmented or semi-aniline: black color is even across panels, grain remains legible, and wear has produced tonal softening without the thick planar cracking expected from a heavily corrected coating. Full-grain status cannot be established. J. H. Bavinton and D. E. Peters, A Simple Method of Assessing the Grain Treatment of Finished Leather, note that finishes can make full-grain, corrected, and printed surfaces difficult to distinguish by ordinary microscopy. The upper-body lining is a black woven textile of probable filament manufacture. Its exact fiber and interlacing are unresolved; acetate, rayon, and polyester remain plausible. The lining reduces drag over underlayers, isolates the skin’s flesh side from the body, and limits distortion at the shoulders and upper back. The leather has minimal structural stretch along reinforced edges but bends readily across broad panels. That combination permits soft vertical fall while demanding stabilization at pocket mouths, buttons, and lapel edges. Its black finish makes abrasion polish, gray flex lines, and pigment loss conspicuous even when the collagen structure remains intact. VIII. Construction & Pattern Analysis The front pattern is divided into upper chest, lower body, central closure, and pocket-related vertical components. This segmentation economizes skin area and converts necessary joins into a compositional grid. The front edge carries a facing that supports buttonholes and forms the lapel; the collar appears separately applied. Set-in sleeves emerge from a moderately extended shoulder line, though the exact sleeve-piece count is unresolved. Torso shaping is limited. No dart suppresses the waist, and the principal vertical seams run close to parallel below the chest. The jacket therefore derives fit from shoulder placement, chest ease, side-seam trajectory, and the natural collapse of the leather instead of pronounced waist intake. The lower panels descend with modest flare at the hem, enough to clear the hips without forming an A-line silhouette. The horizontal chest seam interrupts the body at the level where pocket weight and arm movement would otherwise concentrate strain in one large front piece. Vertical pocket bands then direct that load downward. The arrangement keeps the upper plane broad and the lower front optically long, while the leather’s softness rounds the geometry during wear. Grain direction cannot be mapped with certainty because the black finish and fine grain suppress directional markers. Symmetrical panel behavior indicates deliberate pair cutting. Exact bilateral grain matching was less important than matching thickness, stretch, shade, and surface character across the two fronts. IX. Structural Integrity & Panel Configuration The principal load path runs from collar and shoulder through the upper fronts into the vertical closure and pocket bands. The chest seam distributes the weight of the lower panels across a horizontal join; parallel topstitching keeps its allowances flat. Pocket loads are carried by the long welt structures and adjacent seams instead of being suspended from a single slit in an uninterrupted skin. Stress concentrates at buttonholes, flap-button attachments, pocket-mouth ends, the lapel breakpoint, shoulder ends, armscyes, and the base of the neck loop. No gross seam separation or structural distortion is evident. Surface creasing at the collar and revere records repeated folding and compression, while the lower fronts retain a comparatively even fall. The fine skin makes the jacket comfortable but places greater demands on reinforcement. Repeated loading of the breast pockets could stretch their mouths, and forceful use of the long hand pockets could elongate the terminal stitch holes. The broad lapels distribute fold strain over a wide area, reducing the sharp crease concentration found in narrower, heavily pressed revers. The black finish shows gentle tonal variation and edge polishing associated with flex and handling. These changes contribute dating and use evidence but do not by themselves establish weakness. Structural assessment should distinguish superficial finish loss from collagen damage, since the two require different conservation responses. X. Edge Finishing, Seam Termination & Closures Exterior shell edges at collar, lapels, pocket flaps, front opening, and welts are turned and topstitched. Their rounded profiles indicate folded leather over internal allowances or facings. The collar points are flattened by perimeter stitching, which controls turn of cloth and prevents the soft skin from rolling outward. The horizontal chest seam and principal vertical joins appear plain-seamed or lapped and then flattened by topstitching. Exact internal seam classes are unresolved. Leather does not fray like woven cloth, so edge treatment serves bulk control, appearance, reinforcement, and concealment of the flesh side more than yarn containment. The center front is an ordinary single-breasted overlap with four buttons and worked buttonholes. It is not a fly, storm placket, concealed closure, or internal bearer system. The notched revere leaves the upper chest open when the jacket is worn conventionally and allows a higher closure when the upper button is engaged. The breast-pocket flaps are edge-stitched and buttoned; their pointed lower edges direct stress toward a reinforced central fastening. The hand pockets use long vertical welt-like openings. Their precise internal bag attachment and termination method remain unresolved, but the bands bordering each opening provide stabilized boundaries. XI. Edge Treatment, Wearability & Manufacturing Context Turned and topstitched edges keep the skin away from direct abrasion at collar, pocket, and front-opening margins. The black lining reduces friction over sleeves and knitwear, while the open neck and revere prevent the jacket from functioning as a sealed weather shell. Plain sleeve ends are easy to pass over shirt cuffs but offer no wind closure. The operations demanding the closest control were paired front cutting, collar and lapel turning, equal pocket placement, parallel topstitch spacing, buttonhole formation, and sleeve setting without puckering. Variation in skin thickness could alter feeding and seam compression from one panel to the next. The largely symmetrical result indicates competent production control, while the component count and repeated machine work remain consistent with factory assembly. The 1979 United Nations Industrial Development Organization report Leather Garment Manufacturing describes skin selection after tanning stages, centralized cutting, specialized sewing machinery, operator training, and the use of smaller components for leather sport jackets. Those period observations explain why this jacket’s front is subdivided and why topstitched joins are visually prominent. They do not identify its factory. Component segmentation raised sewing time but improved yield from small skins and allowed local surface or thickness variation to be sorted across less conspicuous pieces. The safari-adjacent archetype was altered for serial manufacture by flattening the pockets, eliminating the belt and epaulets, and using small dress buttons instead of heavy snaps or buckles. The remaining collar, lapel, flap, and welt operations still demanded careful edge turning and matching, but the reduced hardware and flatter front lowered bulk and simplified lining assembly. XII. Cultural Framing The jacket belongs to civilian leisure dressing in which outerwear could carry tailored and utility associations at once. Its revere supports shirts, knit polos, turtlenecks, and open-neck layers; its pocket system permits everyday carrying without the equipment capacity of field clothing. The straight body accommodates movement and layering without the close waist of a formal coat. Black leather carries no single meaning. In this construction it is not sufficient evidence of motorcycle, rock, punk, fetish, or nightlife use. The four-button front, broad lapel, small plastic buttons, and organized pockets point first to a period leisure jacket. Subcultural adoption may have occurred later, but no provenance assigns such use. The most defensible cultural archetype is urban leather leisurewear with a safari-adjacent utility front. The jacket converts a warm-climate, pocket-led outerwear vocabulary into a lined black skin garment for cooler civilian use. What survives from safari dress is visual organization and ready access; what disappears is the belt, epaulet, bellows capacity, pale cloth, and explicit travel equipment function. Gendered market placement remains unresolved. The closure and block are compatible with menswear of the period, yet the record contains no label, catalogue, or provenance that makes this exclusive. Modern cataloging can preserve the historical probability without restricting wearability or inventing a sales department. XIII. Artistic & Aesthetic Direction The whole-object composition is a dark rectilinear field interrupted by one broad diagonal system. Shoulder line and chest seam establish the principal horizontals; center front, pocket bands, and sleeve fall establish verticals; lapels cut across both with descending diagonals. The collar is the largest single plane, and collar plus lapels are overscale relative to button spacing and pocket flaps. The two pointed breast-pocket flaps repeat the collar’s geometry at a smaller scale below. Bilateral symmetry keeps the storage structure subordinate to the central opening. Material changes this geometry. Light collects along rounded topstitched ridges and the raised edges of collar, lapels, flaps, and welts; the panel centers absorb light in deeper black. Fine grain prevents the surface from becoming optically flat, and compression wrinkles soften each geometric boundary. During movement, the lower fronts fold in broad, low-amplitude waves while the reinforced pocket bands remain comparatively stable, producing a dialogue between pliant field and fixed linear frame. The visual system belongs to a historically bounded field of enlarged and hybridized menswear around 1970. Los Angeles County Museum of Art’s Pierre Cardin suit M.2012.5.20a-b documents wide notched lapels in a long jacket of about 1970, while the Philadelphia Museum of Art’s Man’s Jacket/Tunic, dated about 1968, combines convertible lapel treatment with expanded pocket capacity. The present jacket shares neither designer nor exact mechanism; the comparison establishes period adjacency in which collar scale, tailored openings, and utilitarian storage became conspicuous parts of menswear composition. Leather adds another period register. The Metropolitan Museum of Art’s Recent Acquisitions: A Selection 1986–1987 identifies leather as popular in the late 1960s and early 1970s and describes period examples whose surface and movement were central to their visual effect. This jacket occupies the less ornamented end of that field: no studs, fringe, appliqué, or contrasting hardware intervene. Its aesthetic identity rests on black tonal variation, broad collar scale, and the seam grid produced by industrial pattern economy. The result is an urban utility composition without specialist equipment. The wearer’s upper body is broadened by collar and shoulder, then lengthened by the paired vertical pockets and center front. As the skin bends, the black field becomes mobile while its stitched framework stays legible. That union of broad 1970s tailoring, pocketed leisurewear, and fine-grained leather is the object’s central aesthetic proposition. XIV. Historical Placement & Contextual Analysis Dating rests first on proportion and typological combination. The broad pointed collar, wide notched lapels, high breakpoint, four-button long front, straight hip-length body, small dress-type buttons, and safari-adjacent pockets form a coherent 1970s group. Los Angeles County Museum of Art dates Pierre Cardin’s wide-lapelled man’s suit M.2012.5.20a-b to about 1970, and The Metropolitan Museum of Art dates Pierre Cardin’s leather jacket 2009.300.7869 to about 1970. These are proportion and material comparators, not attributions. The second dating strand is the decade’s documented use of leather as fashion material. The Metropolitan Museum of Art’s Recent Acquisitions: A Selection 1986–1987 places several leather ensembles in the late 1960s and early 1970s and explicitly notes the material’s period popularity. The jacket’s plain black finish, extensive machine topstitching, and synthetic-type lining are compatible with serial garment-leather methods documented by the United Nations Industrial Development Organization in 1979. No label, dated hardware, care-symbol regime, registered mark, or measured proportion permits a tighter interval. A late-1960s date remains possible but is weakened by the fully developed broad revere and leisure-jacket synthesis; an early-1980s continuation is also possible, though the collar scale and pocket composition retain stronger 1970s correspondence. A later revival cannot be excluded absolutely, yet no exterior component demands it. Origin hypotheses remain balanced. The Metropolitan Museum of Art’s French Pierre Cardin leather jacket 2009.300.7869 and American Bill Blass Ltd. leather jacket 1985.361.1 establish the material category in both national fashion systems during the decade, but neither shares enough exclusive construction to localize this object. The unmarked buttons, generic lining, and machine methods do not distinguish Western European from North American manufacture. Later circulation is equally unrecorded. The object’s archival value lies in its precise synthesis of fine garment leather, broad tailored revere, and flattened utility storage. It helps define the boundary between true safari construction and the wider pocketed leisurewear that borrowed its visual order. The narrowest supportable central date is 1970–1979; a shorter range would create precision unsupported by documentary or component evidence. XV. Use Case The jacket was designed to be worn over a shirt, fine knit, polo neck, or comparable light layer. The revere could remain open for ventilation or close higher through the top button. The straight torso and moderately extended shoulder allow forward reach and seated posture with less closure strain than a closely suppressed waist would permit. The long vertical hand pockets are accessible while standing and direct the forearms downward, while the buttoned breast pockets retain smaller flat objects. Pocket loads should remain modest: soft lamb- or sheep-family leather can stretch around stitch holes, and the pointed flaps concentrate fastening strain at their buttons. The jacket offers wind resistance and mild thermal buffering but no sealed cuff, throat closure, insulation, or rainproof seam system. Movement produces folding at elbow, lapel breakpoint, shoulder front, and lower torso. Sitting shortens the front and may push the lower buttoned area upward; leaving one or more lower buttons open would reduce that strain. The hip-length hem provides coverage without the sweep needed for walking in a coat, and the absence of a belt leaves torso expansion unrestricted. Preservation should prioritize support and minimal flexing. The black finish is vulnerable to abrasion polish and pigment loss at lapels, pocket edges, sleeve ends, and hem; the skin may stiffen or split if collagen condition declines, while the unidentified lining may weaken independently. The Smithsonian Museum Conservation Institute’s indexed curatorial guide, Toby J. Raphael’s The Care of Leather and Skin Products, stresses that processing history governs deterioration and treatment response. Unknown tannage and finish make generic dressing or adhesive repair unsafe; any intervention should begin with material testing. The intended use was civilian cool-weather leisure outerwear, organized for ordinary carrying and worn movement. Its probable lamb nappa bends easily and falls close to the body, while the stitched panel and pocket framework limits local stretch at the areas most exposed to handling.
View full details