Skip to product information
1 of 4

(West Germany)

Vintage, 1970s

Vintage, 1970s

Regular price $55.00
Regular price Sale price $55.00
Sale Sold out
Shipping calculated at checkout.
Size
Color
This is a waist-length civilian leather blouson of 1988–1994, cut in oxblood probable lamb nappa with raglan sleeves, a low turn-down point collar, and a knitted hem band. Its upper body carries relaxed ease, while the hem band draws the leather shell inward at the hip crest and gives the soft skin a controlled bloused fall. A front separating zipper, slanted double-welt hand pockets, and button-secured leather cuffs place it within urban leisure outerwear, while its leather shell, fold collar, front zip, and knitted waist retain a measured relationship to the Type A-2 flight-jacket family. Raglan cutting, divided hide panels, leather cuffs, and the removal of epaulettes and flap patch pockets establish a civilian redesign, not military issue. The Museum at FIT’s Trend-ology places comparable leather-jacket fashion in 1989–1991; within that period field, this object records a monochrome, serially assembled urban form whose use-oriented pockets and plain surface place material and cut ahead of insignia or applied ornament. I. DESIGNER, HOUSE, MAKER ORIGIN & HISTORICAL PROFILE The designer and manufacturer are unknown. No maker-specific evidence supports attribution to a house, factory, retailer, military service, or national industry. The hardware belongs to the component system and cannot establish garment authorship; the surviving construction therefore supports only a civilian industrial product classification. Probable origin must be divided into manufacture, design source, and market. The design source lies in Euro-American civilian sportswear’s long adaptation of the short leather flight jacket, but the sewing country is unresolved. One hypothesis is manufacture in an export-oriented Asian or South Asian leather-apparel sector for a European or North American market; a second is manufacture within a European or Mediterranean leather-garment industry serving the same market. Uniform colour finishing, modular hide-panel cutting, standardized topstitching, and a molded-tooth zipper suit either system and do not separate them. UNIDO’s Industry and Development: Global Report 1988/89 documents export-oriented leather-product capacity in the Republic of Korea, expanding leather-garment manufacture in Pakistan, and collaborative production arrangements in Taiwan Province; that dispersed structure explains why period technique alone cannot yield a country attribution. The narrowest supportable catalog conclusion is probable manufacture for an international urban sportswear market, with the country of sewing unresolved. The oxblood palette, supple garment skin, compact waist-length proportion, and subdued hardware describe a fashion-market object, yet none is geographically exclusive. Origin remains an administrative question for future label, customs, purchase, or provenance evidence, not a stylistic nationality. II. BRAND HERITAGE, FASHION-HISTORICAL POSITION & INDUSTRY INFLUENCE The relevant history is the late-twentieth-century leather-apparel sector, not a missing brand biography. A United States International Trade Commission investigation, Certain Leather Wearing Apparel, publication 948, recorded an industry of both large firms and small shops, extensive contractor use in peak seasons, and imports rising to more than half of United States consumption by 1978. Its account of styles moving from work and protective clothing toward fashion items during the 1960s and 1970s establishes the production base from which the later civilian leather blouson emerged. The object’s divided panels, repeated machine topstitching, applied pocket welts, and knitted lower band fit a contractor-compatible system in which leather cutting, garment sewing, knit-trim supply, and hardware insertion could be separated among specialized operations. By the object’s proposed date, leather outerwear circulated through fashion, music, and urban casual dress at several price levels. The Museum at FIT’s Trend-ology pairs a North Beach Leather man’s leather jacket of fall 1989, accession 91.192.1, with a cotton imitation of 1991, accession 91.237.1, and records the jacket’s early-1990s movement as an inter-city status form. This blouson does not share that comparator’s graphic emblem or documented subcultural meaning, but it belongs to the same period in which the leather jacket’s material identity could carry the visual emphasis without protective equipment or military provenance. No influence can be assigned to this unknown manufacturer. Its historical position is representative: a serially assembled leather outer layer that combines a familiar flight-jacket waist mechanism with a softer skin, raglan mobility, a small point collar, and discreet hand pockets. Those decisions locate the piece in a broad civilian market that valued the short leather jacket as everyday urban outerwear while preserving enough inherited structure for the type to remain legible. III. GARMENT CLASSIFICATION & DESIGN INTENT The primary type is a civilian zip-front leather blouson. Its body ends around the hip crest, and a knitted band reduces the lower circumference so that ease released through the chest and waist settles above the hem. That controlled fullness distinguishes the piece from a straight leather shirt jacket or car coat. The low turn-down point collar distinguishes it from a café-racer jacket; the centered closure and absence of a diagonal front and notched snap lapels exclude the Perfecto-type motorcycle jacket. It is not a strict bomber jacket because the cuffs and collar are leather, not knitted, and it is not a Type A-2 because the object substitutes raglan sleeves and slanted double-welt pockets for the A-2’s shoulder straps and flap patch pockets. The Smithsonian National Air and Space Museum’s Type A-2 record A20181209000 supplies the specification comparison. The design problem is the reconciliation of a supple, wind-resistant leather shell with ordinary arm movement and seated or walking use. Raglan seams move the shoulder junction away from a fixed armscye point, the upper sleeve carries moderate fullness, and the knitted hem arrests upward drafts while allowing circumferential extension. The front zipper provides rapid opening, the collar can lie flat or rise modestly at the neck, and the slanted pockets align with a standing hand position. Buttoned cuff tabs reduce the wrist opening without the visual and elastic bulk of knitted cuffs. The body is relaxed without reaching an oversized classification. Fullness is concentrated across the upper torso and sleeves, then reduced at the hem; the front panels do not show pronounced waist darts, princess seams, or a long fitted torso. The leather’s low mass allows the blousing to form fine folds instead of a rigid shelf above the knit band. Intended fit therefore depended on moderate layering allowance and flexible containment at the lower edge, not close tailoring through the body. IV. CONSTRUCTION METHODOLOGY & ENGINEERING Assembly probably began with selection and nesting of leather panels around natural skin boundaries, followed by preparation of the collar, pocket welts, zipper facings, cuff bands, and raglan sleeve sections. The upper and lower front panels were joined across a horizontal seam, the raglan sleeve units were assembled from multiple lengthwise and transverse sections, and the completed sleeves were joined from neckline to underarm. The collar and front zipper were then set, the pockets completed before the lower front became inaccessible, and the knitted hem band attached late in the sequence. This order is probable from seam intersections; interior allowance direction and lining operations remain unresolved. Machine lockstitching forms the visible joining and topstitching system. Major seams are secured by parallel rows that flatten allowances and control the soft leather near the raglan line, horizontal body division, sleeve panels, center-front edges, pockets, and cuffs. The stitch length is long enough to avoid excessive perforation while remaining close enough to hold narrow turned margins. The leather cannot recover from needle holes, so alignment at the intersecting horizontal and vertical seams was a one-pass production requirement. The zipper is a full-length separating type with large molded teeth. Narrow leather facings border both tapes and stabilize the center front, while the collar terminates above the slider path so the neckline can open into a shallow V. The rib-knit band is joined directly to the leather lower edge and carries the principal difference in extension between materials. Even feeding, moderated presser-foot pressure, and controlled stretching of the knit were necessary to avoid puckering the leather or leaving the band uneven. V. TECHNICAL DESIGN ELEMENTS & DETAILING The low turn-down point collar is an applied collar with a short fall and rounded point ends. It frames the opened zipper without forming lapels or a revere system. Its modest scale limits bulk at the upper chest and keeps the principal vertical emphasis on the zipper. The collar edge is turned and topstitched; its surface shows the same supple collapse as the body, indicating light support instead of a heavily built undercollar. Each front hand pocket is a slanted double-welt opening. The paired narrow welts protect the cut edge and create a stable mouth without an external flap. Their angle follows the resting forearm and places pocket access below the horizontal body seam. They remain storage components with limited apparent capacity; no bellows, pleat, or patch volume is present. The sleeves use raglan architecture, established by seams running from the neckline region toward the underarm. Additional vertical and transverse divisions break each sleeve into skin-efficient sections, distribute curvature, and reduce the area demanded from any single hide. At the wrist, a leather cuff band and buttoned tab close over a short opening. This is not a knitted flight-jacket cuff: it offers discrete circumference adjustment and preserves the continuous leather surface from shoulder to wrist. The rib-knit hem band is the sole conspicuous textile contrast. Its oxblood tone closely matches the leather, so difference appears through texture and extension instead of colour blocking. A denser decorative or stabilizing course runs horizontally through the band, while the main vertical ribs supply stretch. The band controls lower-body volume and absorbs small changes in posture without requiring elastic casing, buckle tabs, or a drawcord. VI. NOMENCLATURE & HISTORICAL DRIFT “Blouson” is the most exact stable term because the short outer body is drawn inward at the lower edge, creating controlled fullness above the waist or hip band. “Bomber jacket” has broadened in modern usage to include many short zip jackets, but its stricter flight-clothing form ordinarily relies on knitted waist and cuffs, a compact body, and service-derived detailing. This object retains the waist mechanism but replaces the knitted cuffs, redistributes shoulder shaping through raglan seams, and uses civilian welt pockets. The closest documented service comparator is the Type A-2. The Smithsonian National Air and Space Museum describes Type A-2 jacket A20181209000 as a waist-length horsehide jacket with a front brass zipper, wool-knit cuffs and waistband, two snap-flap patch pockets, a stand-and-fall collar with snaps, shoulder straps, rayon lining, and a manufacturer’s label; the type was designated in 1931 after the buttoned Type A-1 was revised with a zipper and leather collar. The present blouson shares the short leather shell, fold collar, centered zipper, and knitted waist, yet it lacks the A-2’s shoulder straps, flap patch pockets, knitted cuffs, and documentary service identity. “Civilian flight-jacket adaptation” therefore names a selective formal inheritance, not specification descent. The raglan sleeve introduces a second sportswear convention. Its seam begins at the neckline and releases the shoulder from a separate set-in armscye cap, allowing the shoulder line to be carried by the sleeve itself. Here that construction softens the flight jacket’s squared service profile and provides a continuous diagonal from collar to underarm. The result is not a military jacket altered after issue; it is a civilian pattern conceived with a different sleeve system. The appropriate cultural archetype is metropolitan leather leisurewear. The Museum at FIT’s Trend-ology records a fall 1989 North Beach Leather jacket, accession 91.192.1, within a moment when leather jackets moved through urban fashion and music culture, while the Metropolitan Museum of Art catalogues Kansai Yamamoto’s early-1980s cotton-and-leather bomber jacket, accession 1993.422.3, as a fashion object. The present piece is visually more subdued and cannot inherit either maker’s meaning, but those dated holdings establish the period field in which bomber and leather-jacket forms were being detached from a single protective or service use. VII. FABRIC COMPOSITION & TEXTILE ENGINEERING The shell is probable lamb nappa. The diagnosis rests on several converging traits: very fine and close grain; thin garment weight; low mass; supple deformation across the chest and sleeve; small, rounded compression wrinkles; and fluid folds above the knitted hem. Lamb is more convincing than adult sheepskin because the surface and thickness appear comparatively even, while goatskin or kidskin would usually retain firmer tensile body and a more distinct ridged or pebbled grain. Calfskin would generally produce denser substance and broader, firmer folds; adult bovine leather would add mass and coarser grain. Pigskin is least persuasive because no characteristic three-pore follicle grouping is present. The species remains probable because the colour finish masks much of the follicular evidence and no exposed flesh side or cut edge supplies a second morphological test. “Nappa” describes the soft garment-leather character, not the animal by itself. Etherington and Roberts, Bookbinding and the Conservation of Books: A Dictionary of Descriptive Terminology, defines nappa as soft full-grain leather traditionally made from unsplit sheepskin, lambskin, or kidskin; the United States Department of Agriculture’s Leather and Tanning Materials glossary likewise associates napa with sheep or lamb glove leather. Modern trade usage has widened, so the object’s species conclusion must continue to rest on morphology and handle. The oxblood colour appears to come from a semi-opaque surface finish that evens the panels while allowing some natural grain and minor variation to remain. A low-to-moderate sheen gathers on raised wrinkles and seam ridges. The surface is neither suede nor nubuck, and no patent-like film is present. Whether the finish is pigmented or semi-aniline cannot be resolved securely; its uniform depth and muted grain favour a light pigment layer, while the remaining skin variation argues against a heavy corrected coating. The leather has no woven grain direction, but it retains directional stretch and differential yield across each skin. The pattern cutter would have oriented high-strain sleeve and body pieces to manage extension and matched adjacent panels by colour, thickness, and surface. The rib-knit hem supplies far greater circumferential extension and recovery than the shell. Its vertical wales contract the lower edge, and the patterned transverse courses help stabilize the band against uncontrolled lengthwise growth. The material system favours mild-weather outerwear. Lamb nappa provides wind resistance and close bodily drape but limited insulation on its own; thermal performance would depend on the unresolved interior layer and garments worn beneath. The skin is susceptible to abrasion at pocket mouths, cuff edges, zipper borders, and shoulder contact points. Repeated compression forms patina and permanent creasing before the leather reaches the coarse cracking associated with severe finish and fibre damage. VIII. CONSTRUCTION & PATTERN ANALYSIS The front is divided into left and right upper and lower fields by the center opening and a horizontal seam crossing the torso near the pocket heads. Narrow leather strips border the zipper, and separate welt pieces form the pocket mouths. The lower front proceeds to the knitted hem with little dart shaping. Volume is therefore set by the breadth of the panels and reduced at the band, not carved through fitted seams. Each raglan sleeve begins at the neckline and carries shoulder volume into a broad upper section. A transverse seam divides the upper arm, while a lengthwise seam shapes the outer sleeve and provides an economical route through the available hide area. The sleeve narrows gradually toward the wrist. The cuff opening and buttoned tab admit the hand and then close the lower circumference; they do not create the elastic seal of a rib cuff. The front balance is slightly bloused, with the hem band sitting inside the leather body circumference. Fine folds descend from the chest and collect above the band. The side line remains broadly vertical through the torso before curving inward at the knit. This is a waist-controlled blouson silhouette, not a fitted-waist jacket, because suppression occurs at the lower band instead of through torso darts or curved princess seams. Leather paneling is both material and compositional. The horizontal body seam aligns with sleeve divisions and establishes a secondary axis across the jacket. Vertical sleeve seams and center-front bands interrupt it, turning the shell into an ordered grid of hide sections. Small variations in grain remain visible across these fields, recording the use of separate skin areas without producing patchwork contrast. IX. STRUCTURAL INTEGRITY & PANEL CONFIGURATION The principal loads travel from the collar and upper torso into the raglan seams, down the sleeves, and through the center-front zipper and lower band. Parallel topstitching spreads stress along the raglan joins and holds allowances away from the moving shoulder. The transverse sleeve seams interrupt long stretches of leather, so their topstitched margins must resist elbow and reaching tension without concentrating it at a single needle line. Pocket mouths are the main localized stress points on the body. The double welts distribute pulling along the diagonal opening, while the ends require secure internal anchoring to prevent tearing. The zipper base experiences opposing forces from the two front halves and the contracting knitted hem; the surrounding leather strips isolate the teeth from direct strain and provide a stable surface for insertion. At the wrist, the cuff button and tab concentrate load in a small area. Multiple layers around the cuff band increase local substance, and the turned, topstitched edge protects the skin from repeated hand passage. The hem seam carries dissimilar materials: minimally extensible leather and strongly extensible rib knit. Its durability depends on even stitch tension and sufficient seam allowance so that the knit can stretch without sawing against perforated leather. Surface creasing is consistent with ordinary flexion and compression, particularly across the torso, inner elbow, and cuff. It does not by itself indicate structural failure. Preservation concern begins where the finish loses continuity, the grain splits, stitch perforations elongate, or the knit loses recovery; those conditions are distinct from the fine wrinkles that give soft lamb-type leather its lived surface. X. EDGE FINISHING, SEAM TERMINATION & CLOSURES Visible leather edges are turned or enclosed and topstitched. The collar, front facings, pocket welts, cuff bands, and sleeve ends show no exposed raw cut edge. Major panel seams appear sewn, allowance-controlled, and externally topstitched. Exact interior edge treatments, seam binding, and lining attachment remain unresolved, so French seaming, bagging, or a specific lining method cannot be assigned. The center-front closure is a full-length separating zipper with molded teeth. It is inserted between narrow leather borders and extends from the lower hem area to the collar base. The closure is exposed as a central vertical line, not concealed, lapped, or set beneath a storm flap. Its large teeth tolerate repeated use and suit the visual scale of the leather without the bright contrast of polished metal. The slanted pocket openings use paired turned welts with topstitched margins. Each opening terminates cleanly above the knit band and below the horizontal body seam. The cuffs use buttons on leather tabs at short wrist openings; they are neither zipper cuffs nor plain sleeve hems. Button replacement would be comparatively localized, while zipper replacement or pocket reconstruction would require work through existing perforations and could alter front balance. Intervention must account for the leather’s permanent needle record. Restitching outside an original line would leave parallel perforations and increase tear risk; excessive heat could harden or gloss the surface, and aggressive flattening would erase established folds. Repair should preserve the relationship among seam allowance, topstitch line, zipper tape, and knit tension. XI. EDGE TREATMENT, WEARABILITY & MANUFACTURING CONTEXT The finishing system balances skin protection with production speed. Turned and topstitched leather borders remove abrasive raw edges from the collar, pockets, front, and cuffs. The knit band protects the lower shell from direct edge wear and gives the body a flexible contact zone. Against the wearer, comfort would depend on the unresolved interior layer, but the absence of bulky external reinforcements keeps the shell light and mobile. Manufacture required leather grading, clicker or template-guided cutting, skiving at folded edges, lockstitch leather sewing, pocket preparation, zipper setting, buttonhole or slit finishing at the cuffs, knit-band attachment, and controlled pressing or rolling without high heat. The most exacting operations were matching paired raglan curves, aligning horizontal seams across body and sleeve, keeping the zipper flat, forming two pocket mouths at the same angle, and attaching the elastic band without rippling the leather. Component reduction is deliberate. There are no epaulettes, patch-pocket flaps, storm flap, belt, or separate waistband adjusters. Visual interest comes from seam placement, grain variation, and the contrast between leather and knit. The flight-jacket archetype is translated into serial civilian manufacture by retaining the front zip and contracted waist, substituting raglan sleeves for set-in shoulders, replacing service pockets with welt hand pockets, and converting knitted cuffs into button-adjusted leather bands. The international leather-apparel industry of the late 1980s could separate hide supply, tanning, design, sewing, and export marketing across borders. UNIDO’s Industry and Development: Global Report 1988/89 describes the Republic of Korea’s export-oriented leather-products sector, Pakistan’s movement from tanning into garment manufacture, and Taiwan Province’s collaborative arrangements with lower-labour-cost production. The blouson’s standardized components and modular paneling are compatible with that distributed system, although they identify no particular country or factory. XII. CULTURAL FRAMING The blouson organized the body for urban movement and intermediate weather. It supplied a wind-resistant outer skin, free shoulder rotation, hand-level pockets, an adjustable wrist, and a stretch lower edge. Its social field was civilian day and evening leisurewear: a short outer layer suited to walking, driving, public transport, and indoor transitions, with enough upper-body ease for a shirt or light knit beneath. Its flight-jacket relationship made a protective archetype available without service status. The Smithsonian National Air and Space Museum’s Type A-2 record A20181209000 identifies the military type through specification-linked features including horsehide, wool-knit cuffs and waist, flap pockets, shoulder straps, and a manufacturer’s label. This jacket retains only selected formal cues and removes the administrative apparatus of uniform: no insignia, property mark, specification label, unit association, or issue system forms part of its classification. The surviving cultural construction is metropolitan leather leisurewear. That formulation is limited to object evidence: monochrome oxblood leather, a compact blouson body, discreet pockets, and a surface whose folds change with movement. It does not establish a luxury tier, gendered buyer, nightlife use, motorcycle identity, or subcultural membership. The Museum at FIT’s Trend-ology places a leather North Beach Leather jacket of fall 1989, accession 91.192.1, beside a cotton version of 1991 and notes the jacket form’s early-1990s circulation across city and suburban markets. The present object carries none of that example’s emblematic graphics, so its cultural force lies at a lower temperature: leather itself, oxblood colour, and the familiar short zip silhouette supply recognition while allowing use across ordinary urban settings. XIII. ARTISTIC & AESTHETIC DIRECTION The whole-object composition is bilateral and zipper-centered. A dark oxblood field is divided by the vertical front closure, then crossed by a horizontal seam through the torso and echoed by transverse sleeve divisions. Curved raglan seams arc from the neck toward the underarm, widening the upper body before the knitted hem pulls the lower edge inward. The collar opens as two shallow triangular planes around the zipper, and the slanted pocket mouths introduce a second pair of diagonals lower on the body. These axes produce a stable hierarchy: zipper first, shoulder arcs second, pockets and panel seams third. Material turns that geometry into a moving surface. Light catches the raised grain, topstitched ridges, and crests of compression folds while the recessed areas deepen toward brown-black. The soft skin prevents the panel grid from becoming rigid; seams hold the principal lines, but the areas between them buckle and relax as the body moves. The knit band absorbs those folds at the hem and presents a finer, repeated vertical rhythm against the irregular leather grain. Tonal colour keeps the material transition legible through relief and scale. The visual field belongs to late-1980s and early-1990s leather fashion, when the jacket circulated across designer collections, street wardrobes, and mass-market adaptations. The Museum at FIT’s Trend-ology documents leather examples from circa 1985 and fall 1989 and a cotton translation from 1991; the Metropolitan Museum of Art holds an early-1980s Kansai Yamamoto bomber jacket in cotton and leather, accession 1993.422.3. These sources establish period adjacency between leather, bomber-derived form, and urban fashion, but not direct influence on this object. Its particular operation is a monochrome reduction of that field: no logo, contrasting trim, padded motif, or metal ornament interrupts the panel structure. The oxblood hue moderates the categorical associations of black biker leather and seal-brown military flight clothing without erasing either comparison. Colour, low sheen, rounded collar points, and soft folds place the blouson within polished civilian outerwear, while the zip and contracted hem retain sportswear speed. The aesthetic identity offered was material-centered and metropolitan: recognizable leather-jacket presence carried by surface and proportion, with ornament reduced to necessary seams, pockets, buttons, and closure. Movement completes the composition by releasing folds through the chest and sleeve, then collecting them at the band. XIV. HISTORICAL PLACEMENT & CONTEXTUAL ANALYSIS The strongest dating evidence is the conjunction of a molded-tooth separating zipper, low point collar, raglan upper body, segmented soft-leather panels, oxblood monochrome, slanted welt pockets, buttoned leather cuffs, and a knitted hem band. No single feature is exclusive to a brief period. Together they fit the late-1980s and early-1990s preference for softened blouson volume, broad shoulder mobility without rigid padding, coloured garment leather, and civilian revision of flight- and bomber-jacket forms, a period field documented by the Museum at FIT in Trend-ology through leather-jacket objects of circa 1985, fall 1989, and 1991. Dated collection evidence supports the interval. The Museum at FIT catalogues the North Beach Leather man’s jacket 91.192.1 to fall 1989 and a related cotton jacket 91.237.1 to 1991; the Metropolitan Museum of Art dates Kansai Yamamoto’s cotton-and-leather bomber jacket 1993.422.3 to the early 1980s and Gianni Versace’s leather and lamb-fleece jacket 1999.467.1 to fall/winter 1992–93. These are comparators for the period visibility and material range of leather jackets, not attributions. The object’s smaller collar, subdued hardware, and relaxed raglan construction place it after the more emphatic leather silhouettes of the early 1980s while remaining compatible with early-1990s urban sportswear. Manufacturing origin remains less precise than design-market placement. Export-oriented Asian and South Asian manufacture is plausible because UNIDO’s Industry and Development: Global Report 1988/89 records substantial and expanding leather-product production for external markets; European or Mediterranean manufacture is equally plausible given established leather-garment industries and the absence of geographically diagnostic labels or components. The construction supports probable production for an international urban fashion market but does not distinguish the sewing country, design office, distributor, or retailer. The object’s archival value lies in its exact combination of inherited and revised features. It preserves the Type A-2 family’s short leather shell, front zip, fold collar, and knitted lower edge while documenting a civilian pattern with raglan sleeves, welt pockets, leather cuffs, softened skin, and monochrome fashion colour. The narrowest supportable central date estimate is 1988–1994; a smaller range would give undue chronological weight to features that remained in circulation across several seasons. XV. USE CASE The blouson was intended to be worn as a short intermediate outer layer, zipped from the lower edge to the collar base or left partly open for ventilation. A shirt, fine knit, or similarly light layer could occupy the available chest and sleeve ease. The knitted hem would sit at the hip crest and reduce drafts, while the collar could lie open around the neck or rise slightly when the zipper was drawn higher. Raglan sleeves permit reaching and shoulder rotation without a fixed sleeve-cap endpoint. The segmented sleeves flex at the elbow, and the buttoned cuff openings admit the hands before being reduced at the wrist. During sitting or driving, the short body avoids the compression and pooling of a long coat; the rib band stretches around the torso, while the soft leather forms folds above it. The slanted pockets accept hands naturally in standing posture but offer less secure carrying than flap, zip, or deep patch pockets. The shell offers wind resistance and modest abrasion protection, not the thermal capacity of shearling or the impact engineering of motorcycle clothing. It could serve cool transitional weather and short outdoor intervals, with warmth determined by the unresolved interior construction and underlying clothing. It lacks a storm flap, sealed seams, high protective collar, reinforced impact zones, and weatherproof hood, so rain, sustained cold, and riding protection fall outside its supported function. Preservation follows the behaviour of probable lamb nappa and rib knit. The leather is vulnerable to drying, finish loss, abrasion, and permanent distortion; the knit may relax, snag, or lose recovery; metal button parts and zipper elements may corrode or abrade adjoining material. Storage must support the raglan shoulder and body without forcing sharp folds, and treatment must avoid heat, saturation, adhesive migration, and new needle perforations. Intended use was mobile civilian urban outerwear, with a supple leather shell supplying wind resistance and visual presence while the raglan sleeves, adjustable cuffs, pockets, front zip, and elasticated hem managed everyday movement.
View full details