Skip to product information
1 of 3

(USSR)

Vintage, 1970s

Vintage, 1970s

Regular price $111.00
Regular price Sale price $111.00
Sale Sold out
Shipping calculated at checkout.
Size
Color
This is a probable men’s civilian single-breasted town overcoat in black, probable cotton-rich narrow-wale corduroy, dated 1972–1977. Its three-button front, broad notched lapels, set-in sleeves, left breast welt, slanted lower welt pockets, and long straight fall place the pile-faced cloth within conventional tailored overcoat architecture. The longitudinal wales give the large collar-and-lapel assembly a directional surface, while the grey twill lining and machine-finished interior pocket belong to serial cut-and-sew manufacture. The early-to-mid-1970s dating is carried most strongly by the lapel scale and long menswear proportion: The Metropolitan Museum of Art describes wide lapels as emblematic on its House of Dior suit of 1970–71, object 2009.300.1027a–c, and catalogues an Ego of London overcoat of about 1975 with an exaggerated collar as a period feature. ([The Metropolitan Museum of Art][1]) The object is most useful as evidence for a 1970s metropolitan overcoat type in which corduroy pile, conventional welt-pocket construction, and broad-lapel tailoring coexist without a surviving house attribution. I. Designer, House, Maker Origin & Historical Profile The designer and manufacturer are unknown. No maker or country-of-origin marking survives, and the back-neck strip is a functional hanging loop, not maker evidence. The three-button front, left breast welt, broad notched lapels, set-in sleeves, full lining, and interior breast pocket support classification within probable men’s civilian tailored outerwear, but none is maker-specific. The sewing country therefore remains unresolved. Two plausible manufacturing hypotheses remain: Western European manufacture and North American manufacture. Their ranking is unresolved because the surviving coat contains no national size system, union label, regulatory fiber statement, branded hardware, contractor mark, or other geographically diagnostic field capable of separating them. Design vocabulary and manufacturing origin must consequently remain distinct: the object can be assigned to a broad 1970s tailored-outerwear vocabulary, while a country-level sewing attribution is not supportable. II. Brand Heritage, Fashion-Historical Position & Industry Influence The coat belongs to a serial tailored-outerwear system in which stylistic emphasis could be concentrated in lapel scale, cloth surface, button choice, and coat length while the assembly remained based on familiar tailoring operations. Its welted pockets, lined body, faced front edges, set-in sleeves, worked buttonholes, and interior breast pocket require coordinated cutting, pocket preparation, collar and lapel shaping, sleeve setting, lining insertion, and pressing. The result is neither a field coat nor a specialist weather shell: its engineering is directed toward coverage over other clothing and a composed civilian exterior. The corduroy shell is the principal material distinction within that system. A directional pile imposes one-way cutting constraints and careful pressing, yet the pattern avoids decorative panel multiplication that would complicate wale alignment. The coat therefore concentrates visual variation in scale and surface while retaining a relatively economical long-body pattern and standard pocket topology. No evidence supports assigning industry influence, proprietary technique, or house signature. III. Garment Classification & Design Intent The stable typology is a long, single-breasted civilian overcoat or town coat with three visible front buttons, broad notched lapels, set-in sleeves, a breast welt, and slanted lower welt pockets. “Overcoat” is preferable to “jacket” because the body extends substantially below the hip and is fully lined for wear over an underlying ensemble. “Topcoat” remains an adjacent term but cannot be fixed without weight and seasonal documentation. The object is not a balmacaan because it lacks raglan sleeves and a short turnover or convertible collar; it is not a trench coat because no belt, storm flap, epaulettes, or double-breasted weather front defines the construction; and no sufficient feature set supports a Chesterfield or covert-coat designation. The design problem is coverage over tailored or semi-tailored clothing without the specialized hardware of protective outerwear. Upper-body room is carried through the shoulder and armscye, while the long body falls with limited waist suppression so an underlayer can occupy the torso without distorting the front. The broad lapels create a large opening at the upper chest when worn conventionally, the three-button front stabilizes the vertical edge below the roll line, and the slanted lower welts provide hand access without projecting pocket bags or flaps from the exterior. IV. Construction Methodology & Engineering The shell is a cut-and-sew woven construction. A probable assembly sequence begins with one-way placement of the corduroy pattern pieces to preserve pile direction, followed by front-pocket preparation, joining of body sections and shoulders, stabilization of the front and lapel area, collar assembly, sleeve insertion, lining construction, attachment of facings and lining, hem completion, buttonhole working, and final button attachment. This sequence is probable from the finished topology; the exact order of lining and hem closure cannot be assigned without opening the existing seams. The front edge and lapels have sufficient body to hold a defined roll and broad notch, indicating internal stabilization, but the surviving evidence does not establish whether the support is sewn canvas, fusible interlining, or a mixed system. The set-in sleeves require controlled easing at the sleeve head so the corduroy does not form abrupt ridges around the armscye. Pile bulk also requires grading at the lapel, collar, pocket welts, and front edges, where multiple shell layers otherwise produce excessive thickness. V. Technical Design Elements & Detailing The upper-body architecture is dominated by a broad turn-down collar and wide notched lapels with a comparatively low visual breakpoint. The notch is substantial and the lapel field occupies a large portion of the chest, producing the clearest chronological signal in the coat. A narrow welt breast pocket sits on the wearer’s left; the lower pockets are oblique welt openings integrated close to the body plane. The pocket system keeps the exterior continuous and leaves the corduroy wales largely uninterrupted. Three mottled brown front buttons provide the principal closure; their horn-like appearance does not establish actual horn, so the material remains unresolved. Each sleeve terminates with a single button near the cuff edge, but no operable cuff opening is established. The grey interior includes a breast pocket with a shell-cloth surround and a narrow lustrous pocket-edge treatment. That interior repetition of shell cloth links the pocket structurally to the facing system and protects a frequently handled opening from direct strain on the lining. VI. Nomenclature and Historical Drift The object sits within the overcoat and town-coat branch of civilian menswear, not within field, raincoat, or balmacaan typologies. The broad notched lapel is a scaled enlargement of suit and overcoat tailoring vocabulary, not a separate collar species. The Metropolitan Museum of Art’s House of Dior suit of 1970–71, object 2009.300.1027a–c, explicitly identifies wide lapels as emblematic of early-1970s menswear; its 1971 Dior ensemble, object 2009.300.1026a,b, also records exaggerated coat length and elongated lapels as features of the moment. ([The Metropolitan Museum of Art][1]) The coat’s lineage is therefore best described as civilian metropolitan overcoat tailoring subjected to the enlarged lapel and length proportions current in the early 1970s. The Ego of London overcoat dated about 1975 in The Metropolitan Museum of Art, object 2009.300.1048a,b, provides a securely catalogued mid-decade comparator in which an exaggerated collar remains a salient menswear feature. ([The Metropolitan Museum of Art][2]) This object does not copy that coat and carries none of its maker identity; the comparison is chronological and typological only. “Metropolitan day overcoat” and “formal-compatible town overcoat” are thus supportable cultural formulations because the construction is suit-compatible, civilian, long, and fully lined, not because a particular wearer or retail channel is documented. VII. Fabric Composition & Textile Engineering The shell is best diagnosed as probable cotton-rich narrow-wale corduroy, possibly containing a synthetic component. The decisive evidence is the repeated longitudinal wale system combined with a low, matte pile surface, soft edge diffusion under light, and the way the cloth holds a broad lapel without the hard diagonal relief expected from whipcord or a clear twill. Velvet is a weaker alternative because its pile is not normally organized into persistent longitudinal cords; a wool-rich ribbed coating is also less persuasive because the surface reads as cut pile over a woven ground, not as yarn-level rib construction. Exact fiber percentage is unresolved, but the shell can be narrowed beyond generic “woven fabric” to probable cotton-rich corduroy. Corduroy is a directional pile textile, so wale orientation and nap direction affect both appearance and cutting. On the long front panels the wales run vertically, reinforcing the coat’s length; at folded lapels the same longitudinal system changes its angle to the viewer, creating a darker or lighter reading depending on pile orientation and incident light. The cloth has enough body for welt construction and lapel shaping while remaining sufficiently pliable for a long, unbelted fall. Pressing must be controlled because pile compression can create persistent flattened zones or shine at edges. The lining is a grey, lustrous twill of probable filament construction, with acetate and viscose among the leading fiber candidates and polyester also plausible. Its fine diagonal structure, smooth face, and low-friction surface distinguish it from the shell and facilitate movement over shirts, knitwear, or tailored jackets. Exact fiber and weave repeat remain unresolved. The lining’s behavior is functionally different from the corduroy: it reduces drag and encloses internal construction while the shell supplies surface depth, body, and abrasion resistance. VIII. Construction & Pattern Analysis The front is patterned as a conventional tailored coat body with separate lapel-and-facing architecture, set-in sleeves, and no belt or waist seam. The shoulder line is defined but not aggressively extended; volume is introduced chiefly through coat-scale shoulder and chest ease, then carried downward in a near-straight body. Waist suppression is modest. Below the upper torso the side seams do not produce a pronounced flare, giving the lower half a parallel or gently released fall. The broad lapels require substantial front extension and a long fold line. Their scale shifts visual mass toward the upper chest without requiring extra external panels. The set-in sleeves are probably multi-piece tailored sleeves, but only the set-in relationship itself is secure. The breast welt and lower oblique welts are cut across the vertical wale field, producing controlled directional interruptions; these openings therefore function both as storage access and as small compositional counter-lines to the shell’s dominant vertical rib. No direct chest, shoulder, sleeve, or total-length measurements survive, so proportional terms remain object-based, not body-size claims. The long body establishes overcoat coverage, but it does not permit a modern size conversion or a precise statement such as knee-length on a particular wearer. The pattern is intended to accommodate an underlayer through ease, not through stretch. IX. Structural Integrity & Panel Configuration The principal load paths run from collar and shoulder through the armscyes and side seams, with secondary stress at the buttonholes, front button attachment points, pocket mouths, and sleeve ends. The full lining helps isolate the shell’s seam allowances from friction against underlayers and allows the exterior to move with less drag. Welt pockets concentrate stress at their short ends; their success depends on reinforcement and accurate clipping because corduroy pile can obscure small distortions until repeated use pulls the opening out of line. The lapel and front facing form another structural zone. Multiple layers at the notch, collar edge, front edge, and button line must be graded so the pile does not create a thick ridge. Corduroy’s cut pile is also vulnerable to localized flattening at contact points, especially pocket entries, lapel edges, cuffs, and button areas. Those are material consequences of the textile structure, not evidence of weak manufacture. X. Edge Finishing, Seam Termination & Closures The principal exterior edges are turned and faced. Lapel and front edges are enclosed, the collar is assembled as a separate tailored unit, the pocket mouths are clean-finished as welts, and the hem is enclosed by the relationship between shell and lining. The fully lined construction conceals most internal shell seam allowances, so a bound, overlocked, or pinked seam classification should not be assigned where the finish is not independently established. The three-button center-front system is conventional and carries no secondary bearer, fly shield, or concealed closure. Worked buttonholes sit directly in the front body and correspond to the mottled buttons. The lower welt pockets are slanted to improve hand entry while maintaining a flat exterior. At the interior breast pocket, the shell-cloth framing transfers repeated handling away from the lighter lining. Any conservation intervention at these welted or faced zones must account for visible needle perforation and pile bruising, because new stitching or hard pressing can register permanently on corduroy. XI. Edge Treatment, Wearability & Manufacturing Context The operations demanding the greatest control are one-way shell cutting, collar-and-lapel preparation, welt-pocket construction, sleeve setting, lining insertion, and pile-sensitive pressing. Corduroy makes marker planning less efficient than a non-directional woven cloth because all major shell pieces should follow a consistent nap direction; reversing a piece can create an obvious tonal mismatch. The same pile increases seam bulk, so accurate trimming and grading matter at the collar, lapels, welts, and front facings. The coat is consistent with serial machine manufacture executed through conventional tailored-outerwear operations. Nothing in the surviving construction establishes hand-padded lapels, hand-set sleeves, bespoke cutting, or workshop-specific finishing. Its historical archetype and manufacturing system meet most clearly in the broad-lapel town-coat front: a familiar overcoat body could accommodate period-scaled lapels and corduroy without abandoning repeatable welt, lining, sleeve, and buttonhole operations. The result is a materially distinctive coat whose manufacture still depends on standardized pattern pieces and sequence control. XII. Cultural Framing The most defensible cultural setting is metropolitan civilian daywear worn over coordinated clothing. The long body, full lining, conventional lapel system, breast welt, and flat lower pockets are compatible with business clothing, tailored separates, or other composed daytime dress, while the corduroy shell introduces a visibly tactile surface not dependent on ornament, insignia, or specialist equipment. No evidence supports military issue, occupational allocation, ceremonial uniform, sport, or protective field use. Within that setting, the strongest archetype is the formal-compatible town overcoat: an outer layer capable of covering a jacket while remaining less ceremonially coded than evening dress. The black surface should not be assigned mourning, professional, or subcultural meaning on color alone. Its cultural specificity comes instead from the combination of long civilian coverage, broad 1970s tailoring proportions, suit-compatible pocket and lapel architecture, and a pile textile that gives the exterior a pronounced tactile register. XIII. Artistic & Aesthetic Direction The whole-object composition is organized by a long dark vertical body crossed by a large V-shaped lapel field. The three front buttons establish a spaced central axis, while the breast welt and two lower oblique pocket mouths create shorter counter-directions. The shoulders provide a firm upper boundary, but the body below them descends with limited interruption and only modest shaping. This hierarchy makes the lapels the principal focal area and the long front planes the secondary field. The shell’s longitudinal wales intensify that vertical organization. Light is absorbed by the black pile and returned in narrow directional bands; where the lapels fold outward, the wale field changes orientation relative to the viewer and the broad V acquires a different tonal density from the body beneath it. The brown buttons interrupt the black plane at three points, and the grey lining produces a sharp interior change in value and surface gloss. The aesthetic effect arises from line, pile, fold, and interval, not from applied decoration. The historically bounded visual comparison is early-to-mid-1970s menswear itself. The Metropolitan Museum of Art describes the wide lapels of its 1970–71 House of Dior menswear suit, object 2009.300.1027a–c, as emblematic of the period, while its Ego of London overcoat of about 1975, object 2009.300.1048a,b, is catalogued with an exaggerated collar as a salient feature of 1970s menswear. ([The Metropolitan Museum of Art][1]) The correspondence here is specific: enlargement of the collar-and-lapel plane relative to the chest, combined with a long outerwear body. It supports period adjacency, not designer influence. Within a metropolitan daywear register, the coat’s aesthetic identity is therefore carried by an enlarged tailored frame laid over a strongly directional textile field. The corduroy does not alter the garment’s basic overcoat grammar; it changes how the same front architecture receives light and how the lapel scale is perceived against the body. The resulting synthesis is best described as broad-lapel 1970s town-coat dressing with a tactile, vertically ordered surface. XIV. Historical Placement & Contextual Analysis The most persuasive chronological evidence is the breadth of the notched lapels, the size of the collar, the long single-breasted body, and the three-button tailored front. The Metropolitan Museum of Art dates a House of Dior menswear suit with wide lapels to 1970–71, object 2009.300.1027a–c, and a second Dior ensemble with exaggerated coat length and elongated lapels to 1971, object 2009.300.1026a,b. ([The Metropolitan Museum of Art][1]) These comparators establish the beginning of the relevant proportion system, but the present coat’s more settled overcoat configuration does not require a date as early as 1970–71. A mid-decade terminus is supported by The Metropolitan Museum of Art’s Ego of London overcoat of about 1975, object 2009.300.1048a,b, whose exaggerated collar is treated as a period menswear feature; the museum also catalogues British and probably French coats around 1970–72, demonstrating that long outerwear and expanded upper-body detailing occurred in more than one national market. ([The Metropolitan Museum of Art][2]) The present coat lacks a dated label, trademark, fiber statement, or hardware code that would justify a narrower interval. Corduroy supports a 1970s reading through material compatibility but does not by itself establish a year. Manufacturing origin remains less determinate than date. Western European and North American production are the leading hypotheses because the coat belongs to a tailored menswear vocabulary documented on both sides of the Atlantic during the period, but the present object offers no country-specific label, size system, union mark, branded component, or construction feature strong enough to rank one above the other. Its archival value lies at the object level: it preserves the conjunction of broad-lapel 1970s proportions, probable cotton-rich narrow-wale corduroy, conventional welted tailoring, and full lining in a civilian town overcoat. Central numeric date estimate: 1972–1977. XV. Use Case The coat was designed to be worn as the outermost civilian layer over shirts, knitwear, tailored jackets, or comparable day clothing. The set-in sleeves and coat-scale torso provide room for arm movement and an underlayer, while the long straight body supplies coverage without a belt. When seated, the lower body must displace around the hips and thighs; when walking, the long hem moves from the side and lower-body ease because no skirt pleats or belt system control it. The slanted lower welts allow hand access with less wrist rotation than horizontal pockets, and the breast pocket provides smaller protected storage. Fastening is straightforward: the three front buttons carry closure load below the lapel roll, while the broad upper opening permits the collar-and-lapel assembly to sit over an underlying neckline. The interior lining reduces friction during dressing, reaching, and removal and limits direct abrasion between corduroy seam allowances and underlayers. The corduroy pile is susceptible to compression, edge polishing, and directional disturbance, especially at pocket mouths, cuffs, lapels, and areas subjected to prolonged pressure; hard pressing can permanently flatten that pile, while the smooth lining is more likely to show abrasion or seam strain than the heavier shell. Storage and repair must preserve the coat’s shoulder shape, lapel roll, pile direction, and existing welt geometry. Prolonged crushing can mark the corduroy surface, and invasive restitching can leave visible perforations in the pile field. The intended use is a long, formal-compatible civilian day overcoat for cool-weather metropolitan wear, with a textile that combines soft pile, directional surface response, moderate body, and the abrasion demands typical of cut-pile outerwear. [1]: https://www.metmuseum.org/art/collection/search/155696?utm_source=chatgpt.com "House of Dior - Suit - French - The Metropolitan Museum of Art" [2]: https://www.metmuseum.org/art/collection/search/155720?utm_source=chatgpt.com "Ego of London - Overcoat - British - The Metropolitan Museum of Art"
View full details