Skip to product information
1 of 5

(Sweden)

Vintage, 1960s, Karakul, Persian Lamb Fur

Vintage, 1960s, Karakul, Persian Lamb Fur

Regular price $66.00
Regular price Sale price $66.00
Sale Sold out
Shipping calculated at checkout.
Size
Color
This is a hip-length single-button coat-jacket of 1968–1975, made in a probable wool-rich loop-stitch knit whose dense uncut curls produce an astrakhan effect. Its maker and manufacturing country are unresolved; its material and form belong to the late-1960s and early-1970s circulation of conspicuously looped knit outerwear. A straight body, softly extended set-in shoulders, long sleeves, and a broad rolled collar with reveres contain the highly active surface within a simple coat block. A full black filament lining and separate front facing stabilize the yielding outer textile, while a low-set molded two-hole disc button supplies the single closure point. The monochrome surface converts repeated loops into low relief, catching light along the collar roll and shoulder curvature while suppressing the visual force of conventional seam lines. The piece is especially useful for examining how a hand-knit-looking textile effect was engineered into a lined outer layer at the typological boundary of cardigan and coat. ([New Zealand Fashion Museum, “Loop pile jacket & velvet flares”](https://nzfashionmuseum.org.nz/l/loop-pile-jacket-velvet-flares/); [The Vintage Pattern Shop, “1968 Vintage Knitting Pattern V12 by Vogue”](https://thevintagepatternshop.com/shop/vintage-knitting-patterns/1960s-knitting-patterns/1968-vintage-knitting-pattern-v12-by-vogue/)) I. Designer, House, Maker Origin & Historical Profile The designer and manufacturer are unknown. No maker, retailer, fiber, care, size, union, or country statement is attached to the surviving interior, and no physical trace establishes that an earlier identification label was removed. The positive evidence is the coordinated use of a black curled-loop outer textile, a separate black woven front facing, a full black filament lining, a large molded button, and a worked horizontal buttonhole. These features establish a complete lined coat-jacket and a professionally resolved closure; they do not identify a company, workshop, country, or gendered market. Two manufacturing routes remain credible. The probable knitted shell could have been worked as shaped panels and then lined by a dressmaker, or cut from stable looped knit yardage and assembled in a small workshop or factory. A 1968 Vogue loop-stitch coat pattern confirms that the technique was available to domestic knitters, while the New Zealand Fashion Museum records a wool loop-pile jacket made in Hamilton about 1970 as a deliberate substitute for fur. The geographical distance between those examples makes the object type useful for dating but not for assigning nationality; no country is supportable here. ([The Vintage Pattern Shop, “1968 Vintage Knitting Pattern V12 by Vogue”](https://thevintagepatternshop.com/shop/vintage-knitting-patterns/1960s-knitting-patterns/1968-vintage-knitting-pattern-v12-by-vogue/); [New Zealand Fashion Museum, “Loop pile jacket & velvet flares”](https://nzfashionmuseum.org.nz/l/loop-pile-jacket-velvet-flares/)) II. Brand Heritage, Fashion-Historical Position & Industry Influence The relevant history is material and product-based, since no commercial entity is evidenced. Textile imitations of astrakhan were reported in American newspapers by the 1910s, and pile manufacturers expanded the category before mid-century synthetics gave the trade new means of varying density, sheen, and curl. Orlon and Dynel, introduced in 1948 and 1950, widened the possible fiber base; by the early 1970s, manufacturers were marketing fake fur not only as a lower-cost substitute but also in response to new arguments about animal use. None of those motives can be assigned to this coat-jacket, yet they define the mature imitation-fur field in which its curled black surface was legible. ([Alice Hines, “The History of Faux Fur,” Smithsonian Magazine, 2015](https://www.smithsonianmag.com/history/history-faux-fur-180953984/)) Looped wool surfaces also circulated through knitting and craft-led fashion. The New Zealand Fashion Museum’s circa-1970 jacket retains its uncut hand-spun wool loops because their loft was preferred to the planned cut surface, while National Museums Scotland dates Margaret Klein’s design for a coat knitted in Bernat Klein No. 15 Wool Boucle to about 1963–1970. FIT’s Fashion History Timeline notes that knitting, crochet, felting, and other craft processes were absorbed into early-1970s fashion as synthetic textiles simultaneously broadened mass-market options. The object joins those strands through a craft-coded surface and a conventional lined coat structure; its significance lies in that constructional conjunction, not in an unproven house identity. ([New Zealand Fashion Museum, “Loop pile jacket & velvet flares”](https://nzfashionmuseum.org.nz/l/loop-pile-jacket-velvet-flares/); [National Museums Scotland, knitting pattern for Bernat Klein No. 15 Wool Boucle coat, circa 1963–1970](https://www.nms.ac.uk/collections/search/object?entry=708532&page=14&production-period=Mid+-+late+1960s&view=cards); [FIT Fashion History Timeline, “1970–1979”](https://fashionhistory.fitnyc.edu/1970-1979/)) III. Garment Classification & Design Intent The object is a coat-jacket: a hip- to upper-thigh-length outer layer with a full lining, separately stabilized fronts, long set-in sleeves, a rolled collar-and-revere system, and one low front button. “Cardigan” alone understates its lining, facing, outerwear weight, and shaped collar. “Fur coat” is materially inaccurate because the surface is constructed from yarn loops and no pelt substrate is present. “Blazer” would overstate suit-tailoring conventions that are not established by welt pockets, canvassing, a notched collar, or a fitted waist. Its design problem is to make a bulky, elastic, snag-prone surface behave as a coherent outer garment. The near-straight body provides space for an underlayer without requiring the looped textile to mold closely over the torso. A broad rolled collar distributes the thick material around the neckline; the deep V prevents excessive bulk at center front; and the single low closure limits the number of buttonholes that must pass through or be supported beneath the irregular surface. Full lining reduces friction against clothing beneath and checks local knit extension at the shoulder, armhole, and front opening. No documentary evidence fixes gender, occasion, or market. The proportions support ordinary cold-weather civilian layering, and the absence of weatherproofing, protective reinforcements, uniform marks, or specialized pocket systems excludes military, occupational, sporting, and severe-weather classification. The black monochrome and fur-recalling texture could serve day or informal evening dress, but no evidence narrows the use beyond non-specialist outerwear. IV. Construction Methodology & Engineering The probable production sequence began with the formation of the looped outer textile, either as shaped knitted panels or as yardage sufficiently stable for cutting. Fronts, back, and sleeves were joined before the collar was set and the front edges were stabilized. A separate smooth facing was applied inside the opening so that the buttonhole could be worked through a controlled substrate. The lining was assembled as a second shell, joined at neckline and front edges, and secured at sleeves and lower edge by a method now concealed. The large button was attached last through a reinforced area of the opposite front. The shoulder and armscye indicate a sewn set-in sleeve with a low, softly rounded cap. The heavy surface must have been compressed or its loops displaced along seam lines to prevent yarn from being trapped unevenly in the stitch path. Lockstitch assembly is probable at the lining and facing; the exact seam class within the outer shell is unresolved because the full lining covers the seam allowances. No evidence establishes fully fashioned shaping, integral whole-garment knitting, pad stitching, canvas, bonded construction, or hand-tailored internal structure. Bulk control governs the engineering. The collar roll avoids a sharp pressed crease that the looped surface could not hold cleanly, while the lining supplies a low-friction interior without flattening the exterior curls. The facing spreads closure strain over a broad area. At the buttonhole, dense thread covering prevents the smooth facing from fraying and keeps the closure aperture independent of the unstable loop field. V. Technical Design Elements & Detailing The upper-body architecture consists of a deep V opening, broad turned-back reveres, and a soft collar roll around the back neck. A genuine collar-and-revere relationship is present, although the pile obscures whether a formal notch separates the components; “notched lapel” is therefore not assigned. The shoulder line extends only modestly beyond the body and terminates in a rounded set-in sleeve head. Long sleeves taper slightly toward plain ends without separate cuffs. The closure is a conventional single-breasted overlap secured at one low point. A large black molded two-hole button, decorated with concentric rings, provides the only hard graphic element. Its diameter distributes load and prevents the fastening from disappearing completely into the pile. The corresponding horizontal buttonhole is worked through the smooth inner facing, whose stable ground carries the repeated shear of fastening and unfastening. Decoration and structure are unusually close. The concentric button is functional ornament, but the exterior’s principal visual content comes from the textile itself. Repeated loops soften panel boundaries, collar edges, and sleeve seams; the design consequently depends on proportion, roll, and surface density more than applied trim. No pocket opening is construction-confirmed, so carrying capacity cannot be assigned. VI. Nomenclature and Historical Drift “Loop-stitch knit” is the narrowest probable textile term. Knitting forms cloth by intermeshing successive yarn loops; a loop stitch adds elongated surface loops that create exceptional volume. “Bouclé” can refer either to a fancy yarn with curled or looped components or to a fabric made from such yarn, and the term does not by itself establish a pile construction. Because the ground and reverse are enclosed, the textile may be a loop-stitch knit or a simpler knit made from strongly looped bouclé yarn. The first is favored by the ordered rows and repeated loop scale, but it remains probable. ([Oregon State University Extension, A. W. Koester, “The Structure of Woven, Knit, and Other Fabrics,” 1976](https://ir.library.oregonstate.edu/downloads/gt54kn19s); [U.S. Federal Trade Commission, discussion of knitted pile formation and raised loops](https://www.ftc.gov/sites/default/files/documents/advisory_opinions/columbia-sportswear/columbiasports.pdf)) “Astrakhan-effect” names the visual ancestry, not the material. Astrakhan or Persian lamb has a pelt base and naturally organized curls; this surface is made from textile yarn and shows no skin. “Faux fur” is historically intelligible but technically broad, since much faux fur has cut or brushed pile with directional hair. The uncut, rounded curls here imitate one part of astrakhan’s appearance without reproducing its pelt structure. Reports of imitation astrakhan predate synthetics, and later pile technologies enlarged the field, so the distinction between imitation and polymer fiber must remain intact. ([Alice Hines, “The History of Faux Fur,” Smithsonian Magazine, 2015](https://www.smithsonianmag.com/history/history-faux-fur-180953984/)) The coat-jacket also revises the knitted cardigan. It retains a knit garment’s yielding body and rolled collar but adds a full woven lining, applied front facing, and a coat-scale button. A securely dated Vogue loop-stitch coat pattern of 1968 and the circa-1970 Hamilton loop-pile jacket show that “coat,” “jacket,” and knitted fur substitute could overlap during this period. The present classification preserves that hybrid without converting it into a named fur type or a conventional tailored blazer. ([The Vintage Pattern Shop, “1968 Vintage Knitting Pattern V12 by Vogue”](https://thevintagepatternshop.com/shop/vintage-knitting-patterns/1960s-knitting-patterns/1968-vintage-knitting-pattern-v12-by-vogue/); [New Zealand Fashion Museum, “Loop pile jacket & velvet flares”](https://nzfashionmuseum.org.nz/l/loop-pile-jacket-velvet-flares/)) VII. Fabric Composition & Textile Engineering The outer textile is most probably wool-rich, possibly with acrylic or nylon in a support yarn; all-wool loop knitting is the second candidate, and an acrylic- or modacrylic-dominant knit is third. The matte black surface, fine fiber halo, rounded compression, and absence of glassy cut-filament tips favor wool content. The regular loop size, saturated black, and apparent resistance to collapse leave a synthetic contribution plausible. No composition ratio is assignable without microscopy, solubility testing, or label evidence. The surface consists of dense, uncut curled loops anchored in an underlying ground. Ordered vertical tendencies support a probable knitted formation, yet the exact repeat, course direction, gauge, and yarn feed remain unresolved beneath the pile. This is not a cut pile, brushed nap, fleece, felt, or shearling. U.S. textile classification treats pile as yarn projections or raised loops created during fabric formation and distinguishes knitted looped-pile structures from long-pile constructions containing inserted fibers; the object fits the former family more closely. ([U.S. Federal Trade Commission, discussion of knitted pile fabrics](https://www.ftc.gov/sites/default/files/documents/advisory_opinions/columbia-sportswear/columbiasports.pdf); [U.S. Census Bureau, Schedule B Chapter 60 definitions](https://www.census.gov/foreign-trade/schedules/b/2017/c60.html)) The outer textile has high cover, substantial loft, low surface luster, and a soft but weight-bearing handle. Air retained among the loops provides insulation, while the knitted ground probably permits limited crosswise extension. The full lining reduces the expression of that stretch in wear. Recovery will depend on fiber: wool would contribute elastic rebound and moisture buffering; acrylic would reduce absorbency and increase sensitivity to heat. The open relief is vulnerable to snagging, loop pull, and local matting under repeated compression. The lining is a fine black filament cloth with a small diagonal interlacing, consistent with a lightweight lining twill. Acetate, viscose filament, and polyester remain the leading fiber candidates. Its smooth face lowers dressing friction and lets the heavy shell move over an underlayer. It also masks and protects the shell seams, though it cannot replace structural reinforcement at the button, shoulder, or neckline. VIII. Construction & Pattern Analysis The principal outer pieces are two fronts, a back, two long sleeves, and a collar or collar extension associated with the front reveres. Separate front facings and a corresponding set of lining pieces complete the interior. The shoulder seams and curved armscyes establish set-in sleeves; neither raglan, dolman, kimono, nor integral sleeve construction applies. A horizontal back-neck lining seam and shaped lining at the armholes follow the outer block. Volume is generated by ease in the body and a softly extended shoulder, not by pleats, gathers, gores, or flare below a defined waist. The side contours run near parallel from the underarm toward the lower edge, with only slight lower-body expansion. No dart or princess seam produces waist suppression. The sleeve is broad enough at the upper arm to accommodate the lofty shell and narrows gradually toward the wrist without a cuff band. The collar and front opening control the visual distribution of volume. Turning back the fronts creates a deep V and moves two thick layers away from center chest. The broad roll rises around the back neck and descends into reveres whose weight opens the upper body. Below the low closure, the fronts retain independent fall. The result is a straight, softly architectural outline whose apparent breadth comes from surface loft as much as from pattern circumference. Grain cannot be named in woven terms while knitted formation remains probable. The surface rows appear broadly consistent across the body and sleeves, suggesting deliberate directional cutting or panel orientation. No motif matching is required, but loop density and direction must remain balanced across the two fronts; otherwise light would produce visibly different black values. IX. Structural Integrity & Panel Configuration The main load path runs from the shoulder seams through the armscyes and down the front and back panels. The full lining bears some suspended weight at the neckline and shoulders and limits local extension, although the outer shell still carries the garment’s mass. The collar base and front facing distribute weight around the neck opening, where an unstabilized loop knit could lengthen under hanging. Closure strain is concentrated at the low button and its opposing buttonhole. The smooth facing spreads force away from individual surface loops; the button’s broad diameter further enlarges the bearing area. Repeated use may still distort the front if the button attachment lacks an internal stay or backing button, neither of which is established. The buttonhole edge shows dense working suited to a fray-prone filament facing. At the armholes and sleeve heads, seam direction intersects repeated shoulder rotation. A lofty knit can conceal seam relaxation until the sleeve begins to drop or twist. At the lower edge and sleeve ends, repeated abrasion can felt a wool-rich surface, polish synthetic fibers, or pull individual loops. The present surface remains substantially continuous, with only light fiber migration and incidental lint; these observations inform material behavior and do not constitute a condition grade. X. Edge Finishing, Seam Termination & Closures The neckline and front opening are clean-finished by the combination of turned outer textile, separate facing, and lining. The exact outer seam allowances and their overlocking, binding, or taping are concealed. The lower edge is turned and associated with the lining, but whether the lining is bagged, free-hanging, or hand-secured at the hem is unresolved. Sleeve ends are plain turned edges without vents, tabs, or applied cuffs. The fastening is an ordinary single-breasted overlap, not a concealed closure, fly, bearer, or waist stay. One large molded black two-hole button with concentric rings is sewn to one front. A horizontal worked buttonhole passes through the opposite front and its smooth facing. The low closure acts as a pivot: it holds the middle body while permitting the collar and upper fronts to roll open and the lower fronts to separate during stride and sitting. Repair at the closure should preserve the facing’s load-spreading role. Reworking the buttonhole directly through loose loops would risk snagging and an enlarged aperture; moving the button would leave compressed yarn and could alter overlap balance. Seam repair also requires the lining to be opened locally, since stitching through both shells would tether their different rates of extension and produce puckering. XI. Edge Treatment, Wearability & Manufacturing Context The smooth lining and faced fronts convert a tactile but abrasive inner surface into wearable outerwear. They let sleeves pass over knitwear or a woven shirt, reduce static catching at elbows and shoulders, and isolate seam allowances from the body. The low single closure leaves the upper chest ventilated and avoids a vertical series of bulky buttonholes. Its cost is limited wind exclusion: the deep V and opening below the button remain permeable. Production required either hand or machine formation of the looped knit, accurate panel preparation, seam joining under a high-loft surface, separate lining assembly, collar setting, facing application, buttonhole working, and button attachment. The most demanding controls were matched loop direction, equal front length, a balanced collar roll, a flat buttonhole facing, and symmetrical sleeve pitch. The surface disguises small stitch deviations, yet it magnifies directional mismatches through changes in highlight and shadow. The jacket translates a labor-intensive-looking loop surface into a familiar lined coat block. The circa-1970 Hamilton example was hand spun and woven into loops as a fur substitute, while the 1968 Vogue pattern offered loop-stitch outerwear through domestic knitting. The present facing, lining, and conventional set-in-sleeve assembly add dressmaking operations to that craft vocabulary. They could be executed in a home workroom or a small factory; routine machine sewing does not decide between them. ([New Zealand Fashion Museum, “Loop pile jacket & velvet flares”](https://nzfashionmuseum.org.nz/l/loop-pile-jacket-velvet-flares/); [The Vintage Pattern Shop, “1968 Vintage Knitting Pattern V12 by Vogue”](https://thevintagepatternshop.com/shop/vintage-knitting-patterns/1960s-knitting-patterns/1968-vintage-knitting-pattern-v12-by-vogue/)) XII. Cultural Framing The coat-jacket organizes the body as a layered civilian figure: broad at the shoulder through textile loft, straight through the torso, and visually concentrated around a deep black V. It supplies moderate thermal insulation without the closure density or weather barriers of a severe-climate coat. The single button and soft lower fronts favor ordinary walking, sitting, and indoor transition. No evidence establishes office regulation, formal ceremony, counterculture membership, or a specialist leisure pursuit. Its strongest wardrobe archetype is textured urban day outerwear. The rolled collar and black lining carry coat conventions; the probable knitted shell contributes cardigan-like yield; and the astrakhan effect recalls a fur category long associated with winter dress. A documented circa-1970 loop-pile jacket was conceived as a substitute for an unattainable fur coat, and the broader fake-fur trade had spent decades converting animal surfaces into textile effects. That history makes substitution legible here, but neither economy, ethics, nor status motive is documented for the individual object. ([New Zealand Fashion Museum, “Loop pile jacket & velvet flares”](https://nzfashionmuseum.org.nz/l/loop-pile-jacket-velvet-flares/); [Alice Hines, “The History of Faux Fur,” Smithsonian Magazine, 2015](https://www.smithsonianmag.com/history/history-faux-fur-180953984/)) The hand-knit-looking surface also belongs to the early-1970s fashion uptake of knitting, crochet, felting, and other craft-associated processes. Here that cultural register is moderated by a complete lining, matched black components, and a single molded button. The object does not present folk iconography, visible mending, mixed textiles, or demonstrable handwork, so “folk revival,” “artisanal coat,” and “countercultural dress” would exceed the evidence. “Craft-surface day coat” describes the surviving relationship more exactly. ([FIT Fashion History Timeline, “1970–1979”](https://fashionhistory.fitnyc.edu/1970-1979/)) XIII. Artistic & Aesthetic Direction The whole object is organized by three nested shapes. The outer silhouette is a long, nearly rectangular body capped by a shallow shoulder arc and two tapering sleeve columns. Within it, the rolled collar and reveres cut a broad V into the upper center, exposing a flatter, faintly lustrous lining field. At the smallest scale, thousands of black curls repeat without a printed motif, producing a dense figure-ground in which the “figure” is relief itself. Symmetry governs body and collar, while the low single button introduces a displaced circular focus. Light, not color contrast, articulates the construction. The curled loops absorb illumination in their recesses and release narrow highlights on their crowns. Collar roll, shoulder curve, and sleeve head therefore become visible as gradients across a black surface, while flat seams recede. When the body moves, loops change orientation independently and the surface flickers at close range; the silhouette remains comparatively stable because the lining checks the probable knit ground. The concentric rings on the button compress the textile’s irregular circularity into one manufactured disc. This relief has a historically bounded adjacency to the expansion of fiber as an art medium around 1970. The Museum of Modern Art’s Wall Hangings exhibition ran from February to May 1969 and presented international textile work at enlarged scale, while post-Minimalist practice beginning in the late 1960s opened geometric form to softer materials, gravity, repetition, and process. No direct influence is documented. The relevant correspondence is narrower: repeated fiber units create volume; soft matter projects from a planar ground; and small variations prevent serial repetition from becoming mechanically uniform. ([Museum of Modern Art, “Wall Hangings,” 1969](https://www.moma.org/calendar/exhibitions/1800); [Solomon R. Guggenheim Museum, “Post-Minimalism”](https://www.guggenheim.org/artwork/movement/post-minimalism)) Within dress, the black monochrome suppresses the colorful craft signals often associated with early-1970s knitting and directs attention to touch, shadow, and bodily scale. The jacket joins the remembered curl of astrakhan to the yielding behavior of knitwear and the stable outline of a lined coat. Its cultural-aesthetic register is neither demonstrably formal nor bohemian: it is tactile city outerwear whose visual intensity comes from material relief, not applied imagery. The body appears enlarged at the surface while the underlying pattern stays simple, making texture the mediator between cardigan softness and coat presence. ([FIT Fashion History Timeline, “1970–1979”](https://fashionhistory.fitnyc.edu/1970-1979/); [Alice Hines, “The History of Faux Fur,” Smithsonian Magazine, 2015](https://www.smithsonianmag.com/history/history-faux-fur-180953984/)) XIV. Historical Placement & Contextual Analysis No explicit date label or maker chronology survives. The greatest chronological weight lies in the probable loop-stitch outer textile, the hip-length straight coat-jacket block, the soft set-in shoulder, the broad rolled collar and reveres, the low single disc button, and the full filament lining. A Vogue loop-stitch coat pattern is dated about 1968; National Museums Scotland records a Bernat Klein bouclé-yarn coat design of about 1963–1970; and the New Zealand Fashion Museum holds a wool loop-pile jacket made about 1970. Together these comparisons place the technique and product type securely at the turn of the decade. ([The Vintage Pattern Shop, “1968 Vintage Knitting Pattern V12 by Vogue”](https://thevintagepatternshop.com/shop/vintage-knitting-patterns/1960s-knitting-patterns/1968-vintage-knitting-pattern-v12-by-vogue/); [National Museums Scotland, Bernat Klein No. 15 Wool Boucle coat pattern, circa 1963–1970](https://www.nms.ac.uk/collections/search/object?entry=708532&page=14&production-period=Mid+-+late+1960s&view=cards); [New Zealand Fashion Museum, “Loop pile jacket & velvet flares”](https://nzfashionmuseum.org.nz/l/loop-pile-jacket-velvet-flares/)) A later 1988–1995 revival is the strongest competing date hypothesis because black textured jackets, broad shoulders, and low one-button fronts recurred in that period. The object lacks the sharply built shoulder, elongated lapel geometry, conspicuous hardware, and longer synthetic cut pile that would make that reading stronger. A 1955–1967 faux-Persian-lamb coat is also plausible at the level of surface, but the probable knitted loop stitch, cardigan-derived roll, and low single closure align more closely with the 1968–1975 comparators. The molded button and generic black lining are supporting evidence only; neither can date the piece independently. ([National Gallery of Victoria, “Westwood | Kawakubo” artwork labels](https://www.ngv.vic.gov.au/labels/westwood-kawakubo-artwork-labels-didactics/); [Yves Saint Laurent Rive Gauche faux-astrakhan jacket, circa 1992, comparative record](https://www.1stdibs.com/fashion/clothing/coats-outerwear/yves-saint-laurent-ysl-grey-faux-astrakhan-fur-black-velvet-jacket-c-1992/id-v_3925473/)) Origin remains less determinate than date. Northern or Western European manufacture and North American manufacture are both possible, as is local workroom assembly from a circulating pattern or looped yardage. No label language, national size, component trademark, union mark, regulatory wording, or documented provenance separates those hypotheses. The strongest production conclusion is that the piece came from a consumer knitwear environment capable of combining looped textile formation with lined-coat dressmaking; the sewing location and sales market remain unresolved. The date places the jacket at a moment when craft-associated processes entered fashion more visibly and synthetic fibers widened the material range of mass apparel, though its own fiber blend is not recorded. Its archival value is specific: the object retains the interface among a probable loop-stitch shell, a stable filament facing, a full lining, and a low single-button closure, allowing the fur-recalling surface to be studied as garment engineering instead of motif alone. The central production estimate is 1968–1975, with the looped textile and coat-jacket geometry carrying the greatest weight. ([FIT Fashion History Timeline, “1970–1979”](https://fashionhistory.fitnyc.edu/1970-1979/)) XV. Use Case The coat-jacket was designed to be worn as a civilian outer layer over a blouse, shirt, dress, or fine knit. The open upper front accommodates collars and high necklines; the straight torso allows modest layering ease; and the full lining permits the shell to slide over another textile. The low button is reached easily with either hand and can remain open indoors. No belt, hood, storm flap, cuff closure, or confirmed pocket system modifies the basic use. During walking, the fronts separate below the button and the lower edge moves in two panels. Sitting increases horizontal strain at the single fastening, so the facing is crucial; unbuttoning would remove that load. Shoulder rotation and elbow flexion are supported by upper-sleeve ease and probable knit extension, while the lining limits excessive growth. The broad collar protects part of the back neck but the deep V leaves the chest exposed, and the unsealed front admits wind. The loop field retains air and supplies probable moderate cold-weather warmth, yet it is neither rainproof nor reliably windproof. Wool-rich content would create risks of moth attack, felting, dimensional change, and distortion under wet handling; a synthetic-rich version would be more vulnerable to heat, polishing, and static soil retention. Both possibilities share risks of snagged loops, crushed relief at shoulders and cuffs, and hanging growth. The unidentified filament lining may abrade, split, or embrittle before the heavier shell fails, especially where it carries neckline and buttonhole strain. Its intended use was non-specialist cold-weather daywear with optional informal evening application. The material gives warmth, visual depth, and limited elastic accommodation; the lined construction makes it wearable over other clothing, while the open V, single closure, and snag-prone surface limit protection, load carrying, and hard use.
View full details