1
/
of
3
Öjes Ernst Larsson (Sweden)
Vintage, 1970s, Goat Suede, Shearling
Vintage, 1970s, Goat Suede, Shearling
Regular price
$222.00
Regular price
Sale price
$222.00
Unit price
/
per
Shipping calculated at checkout.
Couldn't load pickup availability
This is a double-breasted winter overcoat in brown goatskin suede by AB Öjes Ernst Larsson of Malung, Sweden, probably manufactured in Sweden during 1960–1974. Its broad curled-pile collar, substantial revers and insulating interior are consistent with separate sheepskin components, whose species is less securely established than the label-confirmed goatskin shell. Oblique front yokes, longitudinal body divisions and transverse joins accommodate individual skins within an extended overcoat pattern. The maker’s expansion brochure, recording developments through 1962, places its suede clothing within a factory business producing both civilian fashion garments and motor clothing, a product range that supports the coat’s position within practical winter daywear (AB Öjes Ernst Larsson, expansion brochure, product statement). Its particular material distinction is the combination of a goatskin outer shell with probable sheepskin insulation, which should remain separate from the classification of a coat made throughout from wool-bearing sheepskin.
I. Designer, House, Maker Origin & Historical Profile
AB Öjes Ernst Larsson was a Swedish leather-clothing manufacturer in Malung, Dalarna, founded by Öjes Ernst Larsson in 1921. The company’s expansion brochure records enlarged premises in 1939, a sewing factory at Dala-Järna in 1961 and the acquisition of Anbro in 1962. These are documented manufacturing activities, not a national attribution inferred from the language of a label. The coat was probably produced within this Swedish network; the evidence does not distinguish the Malung works from the Dala-Järna branch (AB Öjes Ernst Larsson, expansion brochure, 1921–1962).
The black neck label carries the outlined gold ÖJES mark above the manufacturer’s name and MALUNG. A separate pale woven label states “Garanteras Äkta Getskinn,” guaranteeing genuine goatskin, with a goat device reinforcing the wording. Its attached tab records size 52. The blue ink overprint remains an unassigned mark and carries no established chronological significance. The manufacturer label and material guarantee perform different documentary functions: the former identifies the clothing business, while the latter establishes the leather species without specifying the composition of every internal component.
II. Brand Heritage, Fashion-Historical Position & Industry Influence
Öjes’s documented range encompassed men’s and women’s leather jackets, motor clothing, suede garments of different lengths, waistcoats and occupational clothing. This breadth places the overcoat within a manufacturing business serving several kinds of dress, without requiring an attribution to a named fashion designer. Its undated catalogue presents numbered articles through dressed figures and small construction outlines, evidence of an organized repeatable assortment and a developed sales vocabulary (AB Öjes Ernst Larsson, expansion brochure, product statement; Ö. Ernst Larsson, product catalogue, undated).
The relevant industrial setting was a concentration of competing skinwear firms, not an isolated workshop. Företagshistoria’s account of Malung identifies approximately 150 businesses during the industry’s 1950s and 1960s expansion. Such a setting makes the coat’s combination of material differentiation, standard sizing and repeatable assembly historically specific. It does not establish that Öjes originated the form or exercised influence beyond its documented output (Företagshistoria, “Stil om Malung – orten som satte skinnmodet på kartan”).
III. Garment Classification & Design Intent
The stable classification is a double-breasted winter overcoat with a goatskin suede shell and a substantial insulating interior. The body continues well below the sleeve ends, with modest expansion toward the hem and no external belt controlling the waist. Its volume is distributed through an extended torso and lower body, not through gathers, pleats or a sharply released skirt. This is an outer layer intended to enclose clothing beneath it; a close bodily fit cannot be established from the marked size.
The deep overlap and raised pile address cold-weather coverage, while the open revers permit the neckline to sit away from the throat. The design therefore combines insulation with the familiar opening arrangement of a day overcoat. The original gender classification remains unassigned: size 52 does not, by itself, settle the intended market. Neither the double-breasted fastening nor the brown leather provides evidence of a military or occupational issue system.
IV. Construction Methodology & Engineering
The shell is assembled from shaped skins through a system of machine-sewn joins and topstitching. Its principal constructional problem is to obtain an extended, balanced coat from material whose usable area is limited and irregular. Longitudinal divisions establish the body’s main direction; transverse joins provide additional length without requiring a single uninterrupted skin from shoulder to hem. The result is a planned panel system, not decorative patchwork.
The insulating interior introduces a second requirement: the outer shell must enclose the lining’s thickness without pulling tightly across the body or forcing the front edges apart. Collar and revers likewise require sufficient outer dimensions to turn over the pile. The coat’s broad folded neckline and substantial front overlap are therefore related to its layered construction as well as its outward proportions. Exact concealed reinforcement materials and stitch classes remain unresolved; the exterior topstitching alone does not establish a particular internal seam system.
V. Technical Design Elements & Detailing
The collar has a broad turned-down fall, joined visually to equally substantial revers below the neckline. The separation between collar and revers produces a notched opening, softened by the curled surface. These are components of an overcoat front, not merely a fur-edged slit. The lower revers terminate above the principal fastening zone, allowing the pile to occupy the upper chest while the suede fronts overlap beneath it.
Six dark sew-through buttons form two columns of three. Their modest diameter leaves the collar as the dominant feature, while the repeated positions make the overlap legible. Elongated, slightly oblique hip-pocket mouths are bordered by narrow suede welts; the pockets sit within the body instead of adding external patch compartments. Plain sleeve ends continue the suede surface without repeating the bulky collar treatment. Together these decisions concentrate insulation and surface contrast at the neck while keeping the forearms and lower front comparatively unobstructed.
VI. Nomenclature and Historical Drift
The maker’s own vocabulary provides a more useful historical comparison than an imported military or aviation name. Its undated catalogue includes a fur-collared “Sportpäls,” article 637, and longer belted “Bilkappa” models offered in goatskin as articles 838 and 839. The present overcoat shares the overlap, substantial collar and extended coverage of that winter-outerwear repertoire, but lacks the documented identity of any particular catalogue model. These comparisons establish a company-specific context for civilian outerwear; they do not establish that this coat was designed specifically for motoring (Ö. Ernst Larsson, product catalogue, undated, pp. 2–3).
“Suede” describes the leather’s napped finish, while “goatskin” identifies its animal source. “Shearling” denotes a dressed sheepskin retaining its original wool, normally clipped to a relatively even length. It cannot serve as an unrestricted synonym for this entire coat when the outer leather is explicitly identified as goat. The more exact constructional description is a goatskin suede overcoat with separate pile insulation, probably sheepskin (Leather Working Group, “74 need-to-know leather industry terms,” entries for suede and shearling).
VII. Fabric Composition & Textile Engineering
The outer material is label-confirmed goatskin with a suede surface. Its short diffuse nap, lack of a displayed grain pattern and changing tonal density across folds support that finish. The label establishes goat but does not distinguish adult goat from kid; nor does the napped surface establish whether the leather is split or otherwise processed to a particular thickness. Tannage, leather gauge and finish chemistry remain unverified. The shell has enough body to carry the pocket mouths and front edges, while forming broad rounded folds instead of the narrow creases of a light woven cloth.
The interior and collar most probably comprise wool-bearing sheepskin. Irregular curling, mixed lock lengths and the dense, softly branching fibre field favour sheep over the generally straighter hair of ordinary goatskin. A manufactured curly pile remains a secondary possibility because the component backing is not established. The material guarantee should consequently govern the shell attribution without being extended automatically to the fur. The collar’s tighter surface and the interior’s longer locks may result from different clipping or component selection; they do not establish different animal species.
The leather is a collagenous sheet, not a woven or knitted textile. The probable wool surface supplies compressible loft, while the skin shell supplies the enclosing membrane; neither should be described through a yarn count or weave. The thermal consequence depends partly on retaining air within the pile and avoiding excessive compression. Differences between animal skin, processed leather and fur are material distinctions with direct consequences for flexibility, strength and moisture response (Carole Dignard and Janet Mason, Canadian Conservation Institute, Caring for leather, skin and fur, “Understanding leather, skin and fur”).
VIII. Construction & Pattern Analysis
The front pattern comprises broad overlapping central sections, narrower lateral divisions and upper-front yokes whose lower seams run obliquely toward the armholes. The sleeve attachments remain separate from those diagonal yoke seams: the coat has set-in sleeves, not a raglan construction. This distinction matters because the oblique lines divide the front skins without making the sleeve extend to the neckline. Below them, longitudinal seams maintain the body’s vertical organization through a transverse joining level.
The lower body gains width gradually, without an abruptly flared hem. Its apparent fall results from both that cut and the resistance of the lined leather assembly. Shallow curvature through the body panels is compatible with moderate shaping, but not with a strongly suppressed waist. The sleeves narrow toward plain openings; neither an articulated sporting elbow nor a close adjustable cuff is established. Nap matching across the shell is broadly tonal, allowing small variations between skins without constructing a deliberate contrasting pattern.
IX. Structural Integrity & Panel Configuration
The coat’s weight is carried principally through the shoulder and upper-body assembly. The front buttons resist separation across the overlap, and the pocket mouths interrupt otherwise continuous skin surfaces at points repeatedly loaded by the hands. Long seams help organize the body, but their intersections with transverse joins require accurate alignment to avoid concentrated thickness and local stiffness. The collar introduces additional mass at the neckline, making its attachment and the surrounding upper panels consequential parts of the support system.
Topstitching controls the position of joined edges and makes the panel divisions visually continuous. It should not be treated as proof of unusually high strength: leather perforations can also become tear paths when stitching is excessively close or a seam is repeatedly reworked. Local variations in nap and tone are present, but do not establish a specific wearing history or repair campaign. Preservation depends on supporting the assembled weight without concentrating it at a narrow shoulder point or small suspension loop (Canadian Conservation Institute, Care of Alum, Vegetable and Mineral-tanned Leather, Notes 8/2, “Storage”).
X. Edge Finishing, Seam Termination & Closures
The front edges, sleeve ends and lower hem have defined turned margins, with stitching controlling the suede at the perimeter. The pocket welts similarly provide a finished leather boundary to each opening. At the collar and revers, the pile obscures the seam visually while softening contact with the neck. These treatments have different purposes: the hem contains and levels the lower edge, the welts stabilize openings, and the neckline finish accommodates both turning bulk and bodily contact.
The principal closure is a lateral double-breasted button overlap, with horizontal worked buttonholes in the overlapping front. It is not a wrap secured solely by a belt. The button rows distribute fastening positions along the torso, although the structural work is done by the engaged buttons and holes, not by their visual symmetry. Replacement sewing would need to respect existing perforations; moving a closure or recutting a buttonhole would leave permanent evidence in the skin. No zipper, concealed fly or secondary internal fastening is required to explain the established front arrangement.
XI. Edge Treatment, Wearability & Manufacturing Context
Serial manufacture here still demanded individual handling of skins. The repeated pattern and marked size could standardize shape, while the cutter had to position pieces within usable material and the machinist had to maintain consistent feed across changes in thickness. The critical tolerances are the alignment of the two front halves, the pitch of the sleeves, the levelling of the hem and the balance between collar sides. A mismatch at the neckline would be amplified by the size and light-catching surface of the pile.
Öjes’s expansion brochure reports approximately ninety employees, more than 2,300 square metres of premises and its own designer. These company statements establish an industrial organization capable of coordinating design and sewing; they do not identify the individual responsible for this coat (AB Öjes Ernst Larsson, expansion brochure, 1921–1962). Malung’s municipal chronology also records the establishment of the local skinwear school in 1951, locating such manufacture within an organized setting for vocational training (Malung-Sälen Municipality, “Historia”).
The relationship between the overcoat archetype and factory manufacture is concrete. A familiar collar-and-revers front was retained, while the long body was divided into workable skin components and graded as a numbered size. The broad pile facing required more handling than a plain suede collar, but no decorative embroidery or applied ornament was necessary to produce the principal visual distinction. Edge control and component matching carried much of the production effort.
XII. Cultural Framing
The strongest cultural placement is civilian winter daywear within a Swedish manufacturer’s catalogue-based clothing business. Öjes presented leather outerwear alongside waistcoats, gloves and motor garments, placing skins within an ordinary dressed wardrobe as well as within protective equipment. Its catalogue figures combine outer coats with trousers, headwear and hand protection; the coat’s extended coverage and accessible pockets accord with that general clothing system. This is evidence of the maker’s presentation of use, not a recovered biography of the individual wearer (Ö. Ernst Larsson, product catalogue, undated, pp. 2–3 and glove section).
A useful regional comparison is Sörmlands Museum’s goatskin jacket SLM 39679, dated to the 1960s and attributed to manufacture in Malung. The museum explicitly records fur lining separately from the goatskin leather. Its zip fastening and shorter form distinguish it from this overcoat, but the material combination confirms that fur-lined goatskin belonged to the region’s clothing output. The museum’s later inclusion of that jacket in a motoring exhibition does not confer a motoring history on the Öjes coat (Sörmlands Museum, SLM 39679, Jonssons fabriker AB jacket).
Neither an aristocratic country wardrobe, an alpine resort setting nor a youth subculture is established by brown suede and a substantial collar. “Town overcoat” is used here as a wardrobe classification for non-specialized public daywear, not as a claim about a particular city, class or occupation. The piece combines substantial cold-weather covering with a conventional dressed front; its cultural interpretation need not extend beyond that supported relationship.
XIII. Artistic & Aesthetic Direction
The composition is weighted toward the head and upper chest. Broad collar falls frame the neck, while the descending revers form a second, lower pair of planes above the buttons. Below this concentration of volume, the suede body continues in comparatively long divisions. The oblique yokes turn the upper front outward toward the shoulders; longitudinal seams then carry the eye downward. Three button levels provide measured intervals without competing with the collar. The overlap introduces a modest asymmetry within this otherwise paired organization.
The principal contrast is between surface structures, not between strongly separated colours. Short brown suede nap produces broad tonal changes across panels and folds; the lighter curled pile divides light into many small highlights and recesses. The collar therefore appears thicker and more active than the body even where their colours are close. As the revers turn, their rounded pile edges soften the angular cut beneath them. The aesthetic result depends on the conjunction of a relatively continuous leather field with a localized concentration of fibrous relief.
The relevant visual field is the manufacturer’s own early-1960s skinwear advertising. The expansion brochure covering developments through 1962 places a hide-shaped brand device against irregular black-and-white bands, using strong red areas to announce enlarged resources. Its graphics make the skin itself a recognizable product emblem. The coat shares that emphasis on material recognition, but within a much narrower tonal range: exposed pile identifies the insulated neckline, while the large suede surfaces preserve the outline of an overcoat. This is a comparison between product and promotional presentation, not evidence that the printed design generated the coat’s pattern (AB Öjes Ernst Larsson, expansion brochure, cover).
Its cultural register is consequently that of fur-collared day outerwear made within an industrial skinwear business. The broad revers give the fur an established place in the dressed front; the inset pockets, plain cuffs and unbelted lower body keep attention on that upper concentration. In the firm’s catalogue, fur-collared and leather coats are presented as distinct articles within a coordinated range, providing a specific setting for this balance of insulation and public appearance. The coat’s aesthetic identity lies in making the collar visually substantial while retaining the continuous body and repeated fastening of an everyday overcoat (Ö. Ernst Larsson, product catalogue, undated, pp. 2–3).
XIV. Historical Placement & Contextual Analysis
The maker chronology is more useful than a generic date inferred from suede or brown colouring. Hans Öjes’s company history records the transfer of the family business to Erland and Per Lennart Olsson in the late 1960s, continued operation under the Öjes Ernst Larsson name, and the sale of the factory building to Jofama in 1974. This supplies a probable production horizon, although a building sale is not an absolute terminus for later sale or use of existing stock (Hans Öjes, Malungsskinn, “Öjes Ernst Larsson,” drawing on the Grimsmyrheden family-history records).
The substantial collar and revers, extended unbelted body and gold outlined wordmark are consistent with manufacture in the 1960s or early 1970s. None is a dated model identifier. The 1960s Malung jacket in Sörmlands Museum independently supports the regional currency of the goatskin-and-fur combination, but cannot establish an exact introduction year for this cut. The 1961–1962 factory expansion demonstrates that the maker had a developed production network during the proposed interval; it does not prove a particular factory assignment (Sörmlands Museum, SLM 39679; AB Öjes Ernst Larsson, expansion brochure).
The coat is most plausibly placed within the later output of the Swedish factory business, with a separate insulating interior and a front arranged through the conventions of a civilian overcoat. A narrower season would exceed the available chronological evidence. The central production estimate is 1960–1974, with the maker’s operating history carrying greater weight than the supporting stylistic assessment (Hans Öjes, Malungsskinn, “Öjes Ernst Larsson”).
XV. Use Case
The overcoat was intended to be worn over other clothing, with the lined body allowing for underlying bulk and the overlapping fronts fastened across the torso. The hip pockets permit hand access without opening the coat. When sitting, the extended lower panels would fold across the thighs and the pile would compress beneath the body; when walking, the lower overlap could separate below its last fastening. The plain cuffs allow the wrists to move without the additional mass of fur turnbacks. There is no basis for assigning the article the waterproofness, sealed closures or articulation of purpose-built protective equipment.
The skin and probable wool components also impose different preservation demands. Wetting and uncontrolled drying can distort or stiffen leather, while pressure can flatten the pile and the probable wool remains vulnerable to insect attack. Oily dressings would risk changing the colour and nap of the suede; broad physical support is more appropriate than suspending the coat’s weight from its neck loop. These risks follow from the material diagnosis and should not be mistaken for recorded damage (Carole Dignard and Janet Mason, Canadian Conservation Institute, Caring for leather, skin and fur; Canadian Conservation Institute, Notes 8/2). Its intended function was layered civilian winter wear, combining an enclosing goatskin shell with compressible insulation and an openable overcoat front.
Share
