Skip to product information
1 of 6

CONTE di ROMA for Stockmann (Italy)

Vintage, 1970s, Wool & Cashmere

Vintage, 1970s, Wool & Cashmere

Regular price $55.00
Regular price Sale price $55.00
Sale Sold out
Shipping calculated at checkout.
Size
Color
This is a single-breasted three-button tailored jacket made for Stockmann under Gruppo Finanziario Tessile’s Conte di Roma measured-fit system, dated 1970–1979. Its recorded composition is 80% wool, 10% camel hair and 10% cashmere, formed as a dense raised-nap cloth whose warm brown surface suppresses the weave repeat and reduces tonal contrast at the seams. A vertical button axis, diagonal lapels and stepped pocket horizontals organize the monochrome face as a tonal field whose directional nap becomes more legible in movement. The long torso, dart-shaped fronts and moderately extended shoulders place it within the decade’s professional lounge-jacket wardrobe, while the full lining and machine-made closures identify serial tailored assembly. The Rete Archivi Biellesi identifies Conte di Roma as a Turin-based GFT “su misura” clothing system, and the Stockmann label establishes the Finnish department store as commissioning retailer without establishing the sewing factory. The jacket fixes a specific point at which GFT’s measured-fit product system, Stockmann’s department-store channel and a label-documented multi-animal-fiber cloth met in menswear sold during 1970–1979. I. DESIGNER, HOUSE, MAKER ORIGIN & HISTORICAL PROFILE Gruppo Finanziario Tessile S.p.A., commonly abbreviated GFT, was an Italian apparel enterprise formed in Turin in 1930 from the merger of Donato Levi e Figli and Unites, the Rivetti family’s Biella textile concern. Treccani’s entry Gruppo finanziario tessile traces the firm’s development from cloth commerce and early manufactured clothing into serial garment production and standardized sizing. The Rete Archivi Biellesi identifies Conte di Roma more narrowly as a GFT clothing system based in Turin, described in its institutional record as a system for “su misura” suits and as the title of a publication presenting new collections. Those records establish GFT’s authority over the Conte di Roma identity and its product system; they do not identify the individual designer or sewing plant responsible for this jacket. The label hierarchy divides responsibility among three named parties. “CONTE di ROMA” names the GFT system, while “SPECIALLY MADE FOR STOCKMANN” names Stockmann as the commissioning retail destination. Stockmann Group’s Our Year 2021 states that the Finnish retailer was established in 1862 and operated through the department-store format, a corporate history consistent with the object’s retail label. The sewing manufacturer and country of assembly remain unknown because neither branded label assigns that role. The production ticket bears RN 45011. The Federal Trade Commission’s RN record 111309 assigns that number to Aremkay International of New York, classified as wholesaler and retailer, and the Commission’s Registered Identification Number FAQ explains that an RN may identify a manufacturer, importer, distributor or seller. Aremkay therefore belongs to the jacket’s labeling or distribution chain, not securely to garment manufacture. The same ticket’s multilingual fiber entries and blank code-and-season boxes are useful production documents, yet they do not resolve assembly location. Australian trademark record no. 300347 lists Gruppo Finanziario Tessile S.p.A. as applicant for the Conte di Roma clothing mark on 9 September 1976. Gruppo GFT’s 1991 annual report still lists Conte di Roma among its menswear collections, demonstrating that the name remained in a long-running portfolio. The filing supports a firm mid-decade point for the mark, while the later portfolio evidence prevents use of the brand name alone as a narrow manufacturing date. II. BRAND HERITAGE, FASHION-HISTORICAL POSITION & INDUSTRY INFLUENCE GFT’s historically consequential mechanism was the industrial sizing system behind its tailored clothing. Treccani’s biographical entry Rivetti records that the company measured about 25,000 Italian men during the 1950s and developed a matrix that grew from thirty sizes to roughly 140; Treccani’s Gruppo finanziario tessile connects that work to the expansion of serial clothing manufacture and a unified apparel market in Italy. The Conte di Roma “su misura” designation sits within that history as a measured-fit retail system: individualized selection or adjustment could be marketed through a standardized industrial base. It must not be confused with proof that this jacket was drafted and cut as a one-off hand-tailored commission. The 1991 Gruppo GFT annual report places Conte di Roma beside numerous differentiated menswear collections and states that GFT was coordinating procurement, logistics and production while maintaining distinct collection positions. That portfolio structure helps explain how a Conte di Roma garment could carry a separate Stockmann commission label, a detailed multilingual composition ticket and a United States RN within one object. The jacket presents distributed responsibility as a physical system: GFT controlled the product identity, Stockmann controlled the named retail commission, Aremkay occupied a documented wholesale or retail node, and the sewing contractor remained unnamed. The object tests the Conte di Roma system through its material and build. Its full lining, shaped front, set-in sleeves, coordinated pocket architecture and controlled lapel roll are compatible with a standardized tailored product requiring graded patterns, dedicated pressing and stable interlining. The 80% wool, 10% camel hair and 10% cashmere composition raises the material level above a basic all-wool cloth without altering the serial assembly method. Rete Archivi Biellesi’s description of Conte di Roma as a GFT “su misura” system is therefore borne out most strongly by the conjunction of measured-fit positioning and factory-repeatable tailoring, not by the promotional neck label “Quality Tailored.” III. GARMENT CLASSIFICATION & DESIGN INTENT The primary classification is a single-breasted three-button tailored jacket. It has a notched collar-and-lapel assembly, a welt breast pocket, two lower flapped pockets, set-in sleeves, a shaped front and a full lining. “Blazer” is too specific because the jacket lacks the contrasting metal buttons and club, school or uniform insignia commonly required to establish that subtype. “Suit coat” would imply documented matching trousers, while “sport coat” would assert a separate-use category not stated by the surviving labels. Tailored jacket preserves the secure structure; lounge-jacket continuation describes its historical ancestry without claiming a complete suit. The pattern is intended to cover a shirt and light underlayer while maintaining an elongated, upright torso. Front darts remove excess below the chest, the shoulder line extends moderately beyond the upper torso, and the long skirt below the button stance supplies coverage over the hips. The three-button closure distributes tension vertically across chest, waist and upper abdomen. Lower flapped pockets provide enclosed carrying space with little projecting bulk, while the breast welt accommodates a light handkerchief or flat paper item. The design problem is coordinated professional presentation within a department-store fitting system. The jacket must accommodate graded chest and shoulder dimensions, preserve lapel roll, conceal internal structure, support pocket loads and remain stable through sitting and arm movement. Its dense napped cloth yields a soft surface but does not supply the body shape; darts, shoulder support, interlining, sleeve setting and pressing produce the silhouette. IV. CONSTRUCTION METHODOLOGY & ENGINEERING The jacket follows tailored cut-and-sew assembly. The front pieces were first shaped with darts and prepared for the breast welt, lower pocket mouths and buttonholes; facings and probable interlinings were then joined to the fronts before the body, collar and sleeves were assembled. The lapels required controlled turn of cloth and pressing so that the outer layer could roll without pulling the facing edge forward. Shoulder support and the clean sleeve heads indicate inserted shaping materials, though their exact fiber and fused or sewn attachment cannot be assigned securely. Set-in sleeves were eased into shaped armscyes after their seams and lower openings had been prepared. The three sleeve buttons sit on closed lower-sleeve openings, so they function as a tailored visual termination instead of a working surgeon’s cuff. Pocket flaps and welts required paired cutting with consistent nap direction; reversal would create obvious light-dark shifts. The full lining was assembled separately and joined around facings, neck, armholes and hem through a sequence consistent with bagged or predominantly clean-finished industrial lining insertion. Machine lockstitching is the probable principal joining operation, with machine-worked buttonholes and specialized pocket-welt operations. Pressing is integral to the build: dart intake must be dispersed into the nap, pocket openings must remain flat, sleeve caps must be eased without puckering, and the lapel break must hold a stable curve. The lining encloses most seam allowances, so no unsupported seam-class identification is assigned to hidden internal joins. V. TECHNICAL DESIGN ELEMENTS & DETAILING The notch lapels are the dominant drafting feature. Their moderate width, extended triangular fall and relatively long break line create two diagonals that meet the vertical front opening. A stitched lapel buttonhole appears on the wearer’s left and is structurally non-load-bearing in ordinary use. The collar and lapel edges are turned and clean-finished without visible decorative topstitching, leaving shape and pile direction to define the boundary. Three matching four-hole composition buttons close the front through machine-made horizontal buttonholes. Their close tonal match keeps the closure inside the brown field, while the button spacing establishes the garment’s central vertical rhythm. The lower buttons sit within the dart-shaped torso and the lowest is positioned above the front cutaway, permitting the skirt to separate during sitting. The pocket system differentiates carrying and display. A narrow welt breast pocket sits high on the wearer’s left; two lower pockets use horizontal welts with rectangular flaps that shield the mouths and distribute minor loads across the front. The aligned lower pockets stabilize the horizontal visual field against the lapel diagonals. Three smaller matching buttons repeat at each sleeve end, completing the front-to-cuff hierarchy without introducing a contrasting trim. VI. NOMENCLATURE AND HISTORICAL DRIFT “Lounge jacket” identifies the garment’s typological ancestry: a hip-covering, front-buttoned tailored coat worn with trousers and differentiated from formal tailcoats or double-breasted ceremonial forms. By the 1970s, retail vocabulary could divide closely related examples among suit coats, sport coats and blazers according to matching garments, cloth and use. This object preserves the lounge-jacket structure but lacks evidence of matching trousers, so the modern registry term remains tailored jacket. The Metropolitan Museum of Art’s House of Dior men’s suit of 1970–71, accession 2009.300.1027a–c, provides a securely dated comparison for the decade’s single-breasted suit system and widened lapel vocabulary; its more emphatic lapels show that the feature was shared period language, not a house-specific attribution. The measured-fit-system designation concerns the retail and production mechanism, not a separate coat shape. Rete Archivi Biellesi calls Conte di Roma a GFT system of “su misura” clothing, while Treccani documents the standardized size research that allowed GFT to serve varied bodies through serial patterns. On this jacket, the cutting-order ticket and conventional graded architecture fit that mechanism. The product could receive selection and adjustment for a customer while retaining industrially repeatable fronts, sleeves, collars, pockets and linings. Department-store dressing and metropolitan professional wardrobe are the supported cultural archetypes. The label explicitly names Stockmann, and Stockmann Group’s Our Year 2021 locates the company in a department-store retail history beginning in 1862. The Museum at FIT’s Fashion History Timeline, 1970–1979, notes that the suit remained a staple of men’s dress while color, pattern and alternative suit types broadened. This jacket occupies the conservative side of that documented range: colored and tactile, yet organized through the established three-button professional coat form. VII. FABRIC COMPOSITION & TEXTILE ENGINEERING The production ticket records 80% wool, 10% camel hair and 10% cashmere in multiple languages. A separate black label reads “WOOL & CASHMERE,” omitting the camel-hair component and all percentages. The production ticket is the more specific composition record and is adopted for cataloguing; the black label functions as a simplified material presentation. No evidence supports replacing the stated blend with a generic all-wool identification. The face is densely napped and low in luster. Raised fibers obscure the interlacing, so the weave repeat cannot be named securely. The soft, diffuse face, full cover and slight hairiness are consistent with a probable woollen-system tailoring cloth, though a napped worsted-spun base cannot be excluded without yarn-level examination. “Napped woven cloth” is therefore the secure structural description, and “probable woollen-system” remains qualified wherever used. The cloth appears medium in tailoring weight, compressible at folds and stable across the front plane. Wool supplies resilience, warmth and moisture buffering; camel hair and cashmere can contribute fine fiber, warmth and surface softness, but their precise behavioral share cannot be separated within the finished blend. The nap reduces sharp edge definition and can show directional shading under raking light. It also increases susceptibility to polishing at contact points, localized matting, moth damage and abrasion loss before the base weave itself fails. The smooth taupe lining is a woven filament cloth of unresolved fiber. Its lower friction supports donning over a shirt, isolates the body from internal interlinings and seam allowances, and allows the jacket skirt to move over trousers. It has a finer, more reflective surface than the shell and forms a deliberate interior contrast. Fiber identity and exact weave repeat are not assigned because no lining composition statement survives. VIII. CONSTRUCTION & PATTERN ANALYSIS Each front is organized around a long vertical dart that begins below the chest and controls volume through the waist before releasing into the skirt. This intake creates modest suppression without cutting the torso into conspicuous shaped panels. The side seam carries additional contouring, while the front edge remains nearly vertical through the button zone and opens into a shallow cutaway below the lowest closure. The result is a long torso with a relatively straight lower body, not a boxy or oversized form. The shoulder line is moderately extended and supported. A set-in sleeve meets a shaped armscye with a controlled cap; the sleeve falls with slight forward pitch compatible with a natural resting arm. Elbow ease is distributed through the two-dimensional sleeve shape and seam curvature, while the cuff circumference remains narrow enough to keep the three-button termination close to the wrist. The exact sleeve-piece count is not promoted beyond what the seam evidence secures. The collar is cut to turn around the neck and feed into broad notch lapels. Front facings reproduce the lapel shape internally, and the lining meets those facings inside the chest. Grain is predominantly lengthwise through fronts, sleeves and flaps; consistent nap direction is essential because reversed pieces would read as different browns. The back-panel and vent configuration is not securely recorded and is excluded from subtype identification. IX. STRUCTURAL INTEGRITY & PANEL CONFIGURATION The principal load path runs from collar and shoulder through the armscye and side body, with the front interlining spreading closure tension between buttonholes and buttons. Shoulder support prevents the sleeve weight from collapsing the upper front, and the full lining reduces direct abrasion on seam allowances. The long front darts shape the torso without becoming major load-bearing seams. Pocket mouths are the most localized stress sites. Welt construction spreads load along the horizontal opening, while flap attachment remains visually separate from the pocket bag. Bar-like reinforcements or dense stitching at pocket ends prevent the slit from propagating into the front. Heavy contents would still pull the napped shell out of plane, so the pockets were engineered for limited personal effects, not tools or substantial equipment. Buttonholes concentrate repeated shear in the front edge. Interlining and facing layers stabilize this area, while the rounded four-hole buttons distribute thread load across each fastening. Sleeve heads, underarms, lapel notches and pocket corners require monitoring because repeated flexion, moisture and abrasion can disturb nap, ease stitches or internal shaping before an exterior seam opens. X. EDGE FINISHING, SEAM TERMINATION & CLOSURES External edges at collar, lapels, front, pocket flaps and welt lips are turned and clean-finished. Their seam allowances are enclosed between shell and facing or lining, and the surface shows no applied binding. The jacket hem is enclosed by the lining and controlled with a blind or concealed internal finish; the available construction does not support a more specific stitch identification. The front closes with three sew-through buttons and worked buttonholes. Buttonhole ends are densely secured, and the facing behind them supplies dimensional stability. Sleeve buttons are attached over closed openings, so there is no functional cuff placket to classify. The lapel buttonhole is a decorative-functional remnant for a flower stem or related dress accessory, yet it carries no ordinary closure load. Pocket corners, lapel notches and the lower front cutaway terminate where multiple seam allowances change direction. Repair at those sites must preserve turn of cloth and original edge length. Adhesive insertion near the napped face risks strike-through, stiffness and a visible change in light response; any stitched support would need to follow existing seam allowances and avoid compressing the pile. XI. EDGE TREATMENT, WEARABILITY & MANUFACTURING CONTEXT The enclosed lining edges reduce friction against shirt sleeves and prevent internal seam allowances from catching during dressing. Smooth facings at the front and neck stabilize the opening while keeping the shell’s nap away from repeated interior rubbing. The closed sleeve termination is faster to assemble and easier to grade than a working buttoned vent, while preserving the visual convention of tailored cuffs. Manufacture required straight-knife or band-knife cutting with all shell pieces oriented to one nap direction, lockstitch assembly, specialized welt-pocket equipment or guides, machine buttonholing, sleeve setting and multiple pressing stages. The operations carrying the tightest tolerances were paired pocket height, bilateral lapel shape, collar balance, sleeve pitch, front-edge length and hem leveling. A small mismatch in nap orientation or pressing pressure would remain visible even when seam placement was dimensionally accurate. The cutting-order ticket, standardized components and repeated machine-worked closures align with serial tailored manufacture. Rete Archivi Biellesi’s Conte di Roma record and Treccani’s account of GFT sizing explain how the measured-fit archetype could be delivered through repeatable industrial operations: graded pattern selection and retail adjustment were added around a stable factory sequence. The extra work lay in fit range, pocket precision, controlled pressing and material handling; it did not require one-off coat drafting. The shell’s pile complicates yield because every visible component must share direction, limiting rotation during marker planning. Full lining, paired flaps, welts, facings, collar pieces and shaping materials add component count and handling stages. The “Quality Tailored” neck label is a promotional statement; the production evidence resides in the jacket’s balanced assembly, not in the wording of that label. XII. CULTURAL FRAMING The jacket belongs to department-store dressing: a system in which a retailer gathered branded or commissioned garments, offered size selection and fitting, and supplied coordinated professional clothing. The Stockmann commission label is direct evidence for that channel, and Stockmann Group’s Our Year 2021 traces the retailer’s department-store identity to a company established in 1862. Conte di Roma’s measured-fit positioning added a customer-specific promise inside that retail structure, while GFT’s standardized patterns kept the product compatible with serial manufacture. Its likely wardrobe role was metropolitan professional dress with latitude for color and tactile surface. The Museum at FIT’s Fashion History Timeline, 1970–1979, describes the men’s suit as a continuing staple amid a broader decade of stronger color, pattern and varied suit types. A camel-brown jacket with conventional pockets, notch lapels and three buttons could enter that spectrum without adopting leisure-suit construction, safari pockets or club insignia. The archetype is therefore professional lounge-jacket dressing, not resort, sporting or occupational wear. The cloth adds warmth appropriate to cool-season indoor and urban use, while the full lining supports repeated wear over woven shirts and light knitwear. The jacket organizes the upper body through an extended shoulder, long torso and controlled front, presenting the wearer through tailored proportion instead of protective function. Its pockets accommodate small personal items, and its closure manages sitting and standing within office, restaurant, travel and department-store social settings; no surviving insignia narrows it to a specific institution or rank. XIII. ARTISTIC & AESTHETIC DIRECTION The whole-object composition begins with a long, near-rectangular brown torso interrupted by three systems of line. The lapels create descending diagonals, the buttons form a central vertical axis, and the breast welt plus two lower pocket mouths create stepped horizontals. The shoulder extension broadens the upper plane, while front darts narrow the field through the waist before the skirt resumes a straighter descent. Near symmetry controls the lower front; the single breast pocket and lapel buttonhole provide small asymmetrical accents inside that order. Material changes how this geometry is perceived. The nap diffuses highlights and reduces the dark seam shadows that would articulate a clear-finished cloth, so darts and panel joins emerge through shallow tonal shifts. Buttons and buttonholes punctuate the surface as small hard-edged units, while the pocket flaps cast moving shadows when the body turns. Opening the front reveals the smoother, cooler taupe lining and converts a largely monochrome exterior into paired warm and neutral planes. Walking, sitting and elbow flexion briefly sharpen folds that recede again when the cloth is released. The jacket’s controlled color field sits within a decade that could accommodate both conservative suiting and highly visible menswear. The Museum at FIT’s Fashion History Timeline, 1970–1979, identifies the suit as a continuing male staple while describing a marked expansion of color, pattern and alternative suit forms. As a formal comparison, the Metropolitan Museum of Art’s House of Dior suit of 1970–71, accession 2009.300.1027a–c, uses conspicuously wide lapels as an emblematic period feature. This jacket shares the expanded lapel scale but reduces contrast through one brown hue and a low-luster pile, placing period proportion inside a professional retail register. A parallel interest in tonal saturation appeared beyond clothing. Cooper Hewitt’s Color Vision identifies Verner Panton’s Decor I, released in 1971, as a coordinated interior system built from repeated geometric patterns in graduated saturations, including monochromatic variations. No documentary evidence connects Panton to Conte di Roma, yet the comparison supplies a bounded visual field for the jacket’s tonal organization: repetition and small saturation changes can animate a single dominant color without printed motif. Here the directional pile, seam compression and shifting shadow perform that work on the moving body. The aesthetic identity available to the original wearer was a department-store professional appearance made current through surface and proportion. Warm brown, extended lapels and tactile nap distinguish the jacket from dark smooth business cloth, while the vertical closure and ordered pockets preserve the familiar lounge-jacket frame. The Stockmann commission locates this balance inside a named retail system, and the Museum at FIT’s account of 1970s menswear explains why color could coexist with the suit’s continuing social role. The resulting cultural-aesthetic formulation is a tonal-field professional jacket whose graphic order becomes legible through bodily movement and changing pile direction. XIV. HISTORICAL PLACEMENT & CONTEXTUAL ANALYSIS Dating evidence is unequal. Australian trademark record no. 300347 establishes a 9 September 1976 filing for Conte di Roma by Gruppo Finanziario Tessile S.p.A.; the 1991 Gruppo GFT annual report proves that the collection name persisted much later, so neither record alone dates manufacture. The jacket’s long three-button front, widened notch lapels, lean dart-shaped torso, three-button cuffs and warm napped cloth agree with the broad menswear range summarized by the Museum at FIT’s Fashion History Timeline, 1970–1979. The Metropolitan Museum of Art’s 1970–71 Dior men’s suit, accession 2009.300.1027a–c, supplies a securely dated comparison for widened lapels, while differing enough to prevent a direct house or model attribution. The product ticket adds multilingual fiber disclosure, a cutting-order field, blank code-and-season boxes and RN 45011. Federal Trade Commission RN record 111309 assigns that number to Aremkay International, a New York wholesaler and retailer; the Commission’s RN guidance warns that such numbers can identify several roles in the supply chain. The RN therefore indicates a United States distribution or labeling connection, not a date, factory or country of assembly. Its presence beside the Stockmann label demonstrates a multi-market documentary chain whose participants must remain separate. Probable design-system origin, retail market, distribution and manufacture point in different directions. Rete Archivi Biellesi places the Conte di Roma system in Turin under GFT; the object names Finland’s Stockmann as commissioning retailer; the RN names a New York wholesale-retail entity; no surviving field names the sewing contractor or assembly country. Treccani’s history of GFT and the 1991 Gruppo GFT annual report document a company able to coordinate standardized sizing, procurement, logistics and production across differentiated lines. Italy is the leading assembly hypothesis because GFT controlled the named system, the ticket begins with Italian terminology and the mid-decade trademark record names the Italian company; none identifies a sewing plant, so the hypothesis remains below registry-level manufacture. The strongest conclusion is Italian product-system responsibility for a Finnish department-store commission with an American labeling or distribution node and a probable, unconfirmed Italian assembly context. The date range cannot be narrowed responsibly to the 1976 trademark filing because the mark may have existed before foreign registration and demonstrably continued afterward. Typography, buttons, care symbols and the three-button silhouette are compatible with more than a brief season. Taken together, the period cut and label chronology support a numeric decade while discouraging a fabricated four- or five-year interval. The central date estimate is 1970–1979. XV. USE CASE The jacket was designed to be worn over a collared shirt, with a tie where professional convention required it, and with tailored trousers. A light knit could be added without demanding the bulk allowance of outerwear. The three-button front controls chest and abdomen; leaving the lowest button open reduces stress across the skirt and permits the front edges to separate during sitting. The long torso covers the waistband and upper hip, while the smooth lining allows the shell to slide over adjacent garments. Arm movement is governed by the supported shoulder and set-in sleeve. Forward reach draws the back and sleeve cap toward the armscye, elbow flexion loads the lower sleeve, and sustained sitting opens the lower front and compresses the nap at lap, cuff and pocket level. The jacket permits ordinary walking, desk work, dining and travel movement. It does not supply rain protection, high abrasion resistance, tool carriage or athletic range. Routine maintenance would have depended on brushing, controlled pressing and professional cleaning appropriate to the composition and surviving care ticket. Storage on a broad, shaped hanger protects shoulder geometry; breathable covering and pest management are necessary for the animal fibers. Compression should be minimized because prolonged flattening changes the pile’s light response. Repairs at pocket ends, buttonholes or lining joins should use compatible fine thread and existing seam paths, with pressing tested to avoid glazing or crushing the raised surface.
View full details