Skip to product information
1 of 8

(Austria)

Vintage, 1970s

Vintage, 1970s

Regular price $55.00
Regular price Sale price $55.00
Sale Sold out
Shipping calculated at checkout.
Size
Color
This is a single-breasted civilian winter coat made for a German-language market in 1969–1975, cut with a straight body, slight lower-edge expansion, set-in sleeves, and a high stand-and-roll collar. Its label records a shell of 60% wool and 40% viscose and a lining of 100% viscose; the dense raised surface gives the woven coating visual depth while concealing its exact interlacing. Four concentric-ring plastic buttons establish the front axis, while paired cuff buttons and ochre-brown ribbed-tape keepers create smaller repeated intervals at the wrists. The coat adapts a loden-adjacent material and collar vocabulary to serial civilian daywear without establishing Alpine, military, or occupational use. Its narrow historical value lies in the conjunction of German fibre-disclosure practice documented by Deutscher Bundestag Drucksache VI/2724 and Council Directive 71/307/EEC, blended napped coating, and reduced component geometry at the turn from the late 1960s into the first half of the 1970s. I. Designer, House, Maker Origin & Historical Profile The designer and manufacturer are unknown. The surviving sewn label reads “60% Wolle / 40% Viscose / Futter / 100% Viscose”; it is a composition label, not a house, factory, retailer, or country-of-origin mark. Its German nouns establish preparation for a German-language sales sphere, while the spelling “Viscose” and the absence of an origin statement prevent a national manufacturing attribution. West German retail is the leading market hypothesis because the Deutscher Bundestag’s consumer-protection report, Drucksache VI/2724 of 1971, records the Textilkennzeichnungsgesetz of 1 April 1969, and Council Directive 71/307/EEC of 26 July 1971 required legible fibre names and content particulars for textiles offered to the end purchaser in member states. West German manufacture is plausible, but Austrian manufacture for export or sewing elsewhere for German-language distribution remains viable. The distinction matters because contemporaneous clothing crossed national borders before reaching German shops: Deutscher Bundestag Drucksache VI/754, dated 5 May 1970, records rising textile and clothing imports and exports and gives separate 1969 import shares for Eastern state-trading countries and Yugoslavia. The coat may therefore be assigned to a German-language market, probably West German, while its design office, cutting room, sewing plant, and subsequent circulation remain geographically unresolved. II. Brand Heritage, Fashion-Historical Position & Industry Influence The relevant historical mechanism is standardized fibre disclosure within a large serial apparel trade. The 1969 West German act supplied an early legal threshold for the label, while Council Directive 71/307/EEC established a shared Community vocabulary for fibre names, percentages, and component declarations. The separation of “Futter” from the 60/40 shell made the lining legible as its own material component and placed ordinary outerwear inside an increasingly regulated system of production and sale; this chronology is documented in Deutscher Bundestag Drucksache VI/2724 of 1971 and Council of the European Communities Directive 71/307/EEC, Official Journal L 185, 16 August 1971. The blended shell also belongs to a period manufacturing economy in which wool could be combined with regenerated cellulose to alter cost, mass, handle, and fall while retaining a warm, hair-fibre-rich face. Cross-border supply complicates any assumption that German wording identifies the sewing country: the federal government’s answer in Deutscher Bundestag Drucksache VI/754 describes both a substantial West German textile and clothing industry and active import channels in 1969. The object is consequently more useful as evidence of regulated market circulation and serial material choice than as evidence of a particular national factory practice. III. Garment Classification & Design Intent The primary type is a fully lined, single-breasted civilian winter coat of approximately three-quarter length, with four front buttons, set-in sleeves, a high applied collar, horizontal hip-level pocket openings, and tabbed cuffs. Its nearly straight side lines and modest widening below the hip distinguish it from a sharply waisted fitted coat, while the absence of a belt and pronounced back or waist suppression excludes a belted trench configuration. It is not a cape, car coat, military greatcoat, or field coat: the sleeves are structurally independent, the length provides extended coverage, and no storm flap, epaulette, belt system, insignia, specification mark, or issue evidence is present. The design allocates volume to layered cold-weather dressing. Ease is concentrated through the chest, back, armholes, and sleeve tubes instead of being released through pleats, gathers, or a flared skirt. The four-button front controls overlap from the neck downward; the raised collar limits exposure at the throat; the long body covers the upper legs; and the hip pockets supply hand access and modest carrying capacity. The result is a day coat whose protection comes from surface density, body coverage, and closure continuity, not from a technical weather barrier. IV. Construction Methodology & Engineering The coat is a cut-and-sew construction assembled from woven outercloth, woven lining, plastic buttons, sewing thread, and ribbed tape. A probable sequence began with one-direction cutting of the napped shell, preparation of pocket openings and front facings, joining of shoulder and side seams, assembly and setting of the shaped sleeve units, attachment of the collar, formation of cuff tabs, installation of closures, and insertion of the lining before final edge closing and pressing. The concealed internal structure permits more than one exact factory sequence, so the order of facing, collar, and lining operations remains probable. The collar and front edges required local stabilization to preserve their outline against the pliant blend. Turn of cloth is controlled at the collar seam so that the outer layer can roll without exposing its seam allowance; similar bulk control is necessary at the front corners and cuff-tab ends. Sleeve-head ease is distributed through the upper armscye without gathers, maintaining a broad shoulder line while allowing rotation. The lining is suspended independently enough to move against underlayers, yet joined closely at edges and openings so that it cannot drop below the shell. V. Technical Design Elements & Detailing The neckline carries an applied stand collar with a soft outward roll, not a lapel-and-revere system. Its curved lower edge joins the neck seam and meets the buttoned front at a high breakpoint, allowing the uppermost closure to seal near the throat. The center front is organized by four green-grey, two-hole moulded buttons with concentric stepped rings; machine-worked buttonholes provide the receiving openings. Their close color relation to the outercloth makes relief, shadow, and circular repetition more prominent than hue contrast. Each sleeve terminates in a broad applied tab held by two buttons. Narrow ochre-brown ribbed-tape elements form keepers or looped accents at the tab ends, adding friction and localized reinforcement while interrupting the grey-green surface with short transverse bars. The topology supports the term buttoned cuff tab, but it does not establish a tightly adjustable storm cuff. Horizontal hip pocket mouths are absorbed into the nap and remain secondary to the central closure axis; the lining isolates pocket contents from the shell’s reverse face. VI. Nomenclature and Historical Drift “Winter coat,” “day coat,” and “single-breasted outercoat” are secure classifications. “Stand-and-roll collar” records the applied neckband’s ability to stand close to the neck and soften outward; “funnel collar” would suggest a more continuous flared tube, while “mandarin collar” would imply a lower, firmer upright band with a different historical vocabulary. “Greatcoat,” “field coat,” and “uniform coat” are unsupported because color and general coverage do not supply institutional identity, procurement status, or the defining systems of those types. “Loden” is useful only as a bounded textile comparison. Première Vision’s Textile Glossary: Woolens defines loden as an Austrian broadcloth that is fulled and then brushed to align surface fibres; it also identifies fulling as compression and rubbing that produces a felted appearance. This coat shares dense cover, a brushed or raised face, an olive-grey palette, and cold-weather use, but no documentary evidence confirms loden manufacture, fibre alignment, Austrian origin, or the necessary finishing sequence. “Loden-adjacent napped wool–viscose coating” therefore records historical resemblance without converting resemblance into cloth identity. VII. Fabric Composition & Textile Engineering The shell composition is label-confirmed as 60% wool and 40% viscose. The face is densely napped, mottled, and low in sheen; protruding staple ends obscure the underlying interlacing, so plain weave, twill, and a named broadcloth cannot be separated securely. The bulky, diffuse surface and heathered color are consistent with a woollen-system-type yarn preparation, but this remains a technical inference because yarn cross-sections and the cloth reverse do not establish the spinning route. The cloth should be registered as a woven napped coating of unresolved interlacing, not as felt, boiled wool, melton, or loden. Wool supplies crimp, loft, thermal buffering, and the capacity for a raised cohesive face; viscose increases regenerated-cellulose content, moderates spring, and contributes a more yielding fall than an otherwise comparable all-wool coating. Those effects depend on yarn placement and finishing, neither of which is documented by the percentage label alone. Première Vision’s Textile Glossary: Woolens describes fulling as a process that compresses and rubs woven woollens and notes that brushing can raise and organize surface fibres; the present cloth shows the resulting visual family without proving that exact sequence. The olive-green lining is separately labelled 100% viscose. It is a fine, closely set filament cloth with slight surface reflection and low bulk; its exact weave is unresolved. Against the rougher shell reverse, the lining reduces friction over underclothing, closes internal seam allowances, and permits the coat to settle after arm and torso movement. The shell and lining therefore divide thermal and tactile work between two distinct textile systems documented on a single label. VIII. Construction & Pattern Analysis The pattern architecture begins with paired fronts extending from shoulder to hem, a back body, an applied collar, set-in sleeves, front facings, pockets, cuff tabs, and a separately cut lining. The shoulder line is broad and only lightly sloped. An armscye seam, not a diagonal neck-to-underarm seam, identifies the sleeves as set-in; the sleeve heads are shallow enough to preserve layering ease, while the long sleeve tubes descend with limited taper before the tabbed cuffs. No visible bust, waist, or skirt darts control the torso. Shaping is carried chiefly by the side-seam trajectory, shoulder seam, armscye, and the modest expansion of the body toward the hem. This distributes capacity continuously from chest to lower edge, producing a straight static outline with a small increase in walking room below the hip. The napped coating bends in broad, subdued folds; it does not collapse into the narrow cascading folds expected from a lighter dress cloth. The collar is cut as an independent curved component whose neckline seam establishes its stand. The front facing supports buttonholes, edge turn, and collar junction, while the lining follows the shell with enough extra length and width to avoid drawing the hem or sleeve heads. Pocket bags add internal volume at the hip and must be controlled so their weight does not pull the pocket mouths out of line. IX. Structural Integrity & Panel Configuration Load is concentrated at the shoulder seams, neck seam, sleeve heads, pocket mouths, button attachments, and front buttonholes. The unwaisted body reduces sustained transverse strain at the torso, allowing the shell to hang principally from the shoulders. Front overlap transfers local closure force through the faced edge, while the collar distributes upper-button tension around the neckline. Set-in sleeves place reaching stress at the armscyes and underarm seams, where balanced seam allowance and sound stitching are more consequential than surface ornament. The pocket openings interrupt otherwise continuous front panels and are probable high-wear sites through repeated hand entry and carried weight. Cuff tabs introduce small point loads at button stitching and tape attachments; their paired arrangement spreads these forces across a wider sleeve-end area. The lining protects shell seams from abrasion and carries little primary weight, but any shrinkage differential between viscose lining and wool–viscose shell could distort hem level, sleeve hang, and front balance. X. Edge Finishing, Seam Termination & Closures The front edges, collar perimeter, sleeve ends, and lower edge are turned and enclosed through facings, hems, or lining joins. Exterior seams are narrow and visually absorbed by the nap. The fully lined interior conceals most shell seam allowances, so conventional pressed plain seams are probable, while exact overcasting or binding beneath the lining remains unresolved. Machine stitching secures the lining seam, and the label is caught to the lining with a short line of stitching. The buttonholes are machine worked through stabilized front layers. Two-hole moulded buttons are attached with thread shanks sufficient for the coating’s thickness, allowing the overlap to sit without severe compression. The same button family appears at the cuffs, making replacement mechanically simple but visually dependent on matching diameter, stepped-ring profile, and grey-green color. Repairs at buttonholes or pocket mouths would require controlled handling: dense nap can conceal fine stitching, yet repeated needle entry and pressing can flatten the raised surface and leave a harder local patch. XI. Edge Treatment, Wearability & Manufacturing Context Serial manufacture required a straight-knife or band-knife cutting stage, single-needle lockstitch assembly, machine buttonholing, button sewing, pocket preparation, lining installation, and pressing adapted to a raised wool-blend face. The nap makes cutting direction consequential: reversing a major panel could change light reflection and color depth, so a one-way lay was probably used even at the cost of reduced cloth yield. Collar balance, even sleeve pitch, parallel button spacing, matched cuff-tab placement, level pockets, and a true hem demanded the closest quality control. The construction converts a loden-adjacent day-coat archetype into a moderate-component serial product. Dense raised coating, high neck coverage, and a long straight body retain the cold-weather associations of milled wool outerwear, while the viscose-rich blend, plastic buttons, limited torso shaping, and machine-finished closures reduce mass and operation count. Première Vision’s Textile Glossary: Woolens places loden within fulled and brushed Austrian broadcloths used for coats; here the connection is an industrial translation of surface and use conventions, not proof of regional cloth or folk-dress descent. Wearability depends on the relationship between a coarse outer face and a smooth internal lining. The lining lets sleeves pass over knitwear and limits abrasion at the wearer’s clothing; the broad armholes and unsuppressed torso preserve reach and layered volume. At the neck and cuffs, multiple turned layers create the greatest thickness, so accurate seam grading and pressing were needed to prevent stiff ridges without crushing the pile. XII. Cultural Framing The most supportable wardrobe context is civilian cold-weather daywear for a German-language retail sphere. Its length, hand pockets, full lining, throat closure, and layering ease suit routine travel on foot or by public transport, outdoor transitions, and entry into heated interiors. The coat does not define a specific profession, ceremony, sport, or institutional role, and its fastening direction, palette, and straight silhouette do not establish a gender category. Several more specific archetypes fail on material evidence. The olive-grey napped cloth is insufficient for Alpine or Bavarian dress without tracht construction, regional trim, provenance, or documented mountain use. Cuff tabs and high coverage do not establish equestrian, estate, hunting, or fieldwear without equipment accommodation, reinforced wear zones, specification features, or a use record. The remaining historical category is the urban winter day coat: an outer layer organized for coverage, pockets, serial fastening, and repeated daily removal and refastening. The ochre tape and green plastic buttons keep the object within ordinary manufactured dress while giving the surface a controlled component rhythm. This is not a claim of social rank or personal identity. It identifies how small, inexpensive parts differentiated a plain coating coat within a retail field where cloth, collar shape, and hardware could carry most of the visual distinction. XIII. Artistic & Aesthetic Direction The whole-object composition is frontal, nearly bilateral, and vertically weighted. A long grey-green plane descends from the broad shoulder line with little waist interruption, while four circular buttons divide the center axis into unequal but measured intervals. The collar compresses the upper outline into a shallow raised arc; set-in sleeve seams articulate the shoulder corners; horizontal pocket mouths cross the lower torso; and cuff tabs create two lateral bars near the hemward end of the sleeves. These elements set vertical descent against short transverse interruptions, with the body’s slight hem expansion preventing the lower silhouette from becoming fully parallel. Surface nap turns the outercloth into a light-responsive field. Heathered fibres break the color into minute grey, green, and brown incidents, so broad planes absorb light while exposed edges and button rims produce firmer highlights. The concentric button rings introduce shallow relief at a scale much larger than the fibre mottling, and the ochre ribbed tape supplies the only sharp linear contrast. In movement, the shell forms broad folds from shoulder and elbow, while the lining permits those folds to release; the visual system shifts through changes in relief, not through printed motif or high chromatic contrast. The reduced palette, repeated circular components, and interval-based front axis have a historically bounded cross-media analogue in postwar West German product and communication design. HfG-Archiv/Museum Ulm, The History of the HfG, records the Hochschule für Gestaltung Ulm as an international center for industrial product design and visual communication from 1953 to 1968; the Museum of Modern Art catalogues Dieter Rams and the HfG Ulm-associated Braun Pocket Radio T3 of 1958, object 595.1965, as a plastic-cased product organized through spare geometry and serial controls. The coat’s buttons are ordinary apparel hardware, not Braun-derived motifs, but their moulded rings against an uninterrupted field permit a precise comparison in scale, repetition, and material contrast. The relationship is independent formal convergence within the same broad German-market visual environment, not documented influence. Within civilian daywear, this component order offers a product-design-adjacent register without turning the coat into an art object. The straight body keeps attention on plane and interval; the soft raised face prevents the geometry from appearing hard-edged; and the tape loops introduce a minor vernacular note at the cuffs. Worn, the front axis remains stable while sleeve bars move independently with the arms, shifting the composition from bilateral display to alternating lateral accents. Its aesthetic identity is therefore grounded in the meeting of a tactile cold-weather coating, serially moulded hardware, and bodily movement within ordinary urban outerwear. XIV. Historical Placement & Contextual Analysis The fibre label supplies the strongest chronological evidence. Deutscher Bundestag Drucksache VI/2724 records the West German Textilkennzeichnungsgesetz of 1 April 1969, providing a strong working threshold for percentage-based fibre disclosure in that market; Council Directive 71/307/EEC of 26 July 1971 then standardized textile names, fibre particulars, and legible sale labeling across the original Community members. The separate shell and lining declarations fit this early regulated environment. These facts establish compatibility with manufacture after 1969, but they do not by themselves fix the year or sewing country. Cut, hardware, and museum comparators narrow the working range. The broad shoulder, minimally suppressed body, high neck closure, plastic ring buttons, and long day-coat proportion align with wool outerwear held as Norman Norell, Woman’s Coat, around 1963, Los Angeles County Museum of Art AC1996.184.7; Geoffrey Beene, Coat, about 1965, Metropolitan Museum of Art 2009.300.545; and Bob Bugnand, Coat, 1965–1973, Metropolitan Museum of Art 1975.346.14. These comparators secure the period currency of wool coats with plastic closures and related simplified volumes; they are not maker, country, or exact-pattern matches. In combination with the post-1969 label, they support the first half of the 1970s more strongly than a pre-1969 or later-1970s placement. Probable origin divides into two principal hypotheses. West German production for domestic sale fits the language, regulatory chronology, and apparent retail typology; Austrian or other cross-border production for West German distribution fits the loden-adjacent surface and a market in which imported clothing was routine. Deutscher Bundestag Drucksache VI/754, 5 May 1970, quantifies textile and clothing imports from Eastern state-trading countries and Yugoslavia while also recording rising German textile exports, demonstrating that label market and sewing location need not coincide. The narrow conclusion is a coat made for a German-language market, probably West German retail, with manufacture unresolved. Its historical placement is specific but modest: it joins an early fibre-disclosure label to a wool–viscose napped coating, fully lined cut-and-sew construction, and serial plastic hardware. That conjunction helps date a non-branded civilian coat without transferring identity from stylistic resemblance. The central registration date is 1969–1975. XV. Use Case The coat was intended to be worn over indoor clothing, plausibly including a shirt, knit layer, or light jacket, with the smooth viscose lining reducing drag during dressing. Closing all four buttons and raising the collar increased throat and torso coverage; opening the upper buttons released the neck without creating a true lapel system. Broad armholes and set-in sleeves permit ordinary reaching and elbow flexion, while the long straight body moves from the shoulders and parts at the center front during a long stride or seated posture. Hip pockets accept hands and small personal articles, but the cloth and pocket construction do not indicate equipment carriage. The cuff tabs add local weight and hold the sleeve-end outline; their two-button arrangement does not create a sealed weather cuff. The coat can buffer cold and light wind through loft, nap, and body coverage, but it has no documented waterproof membrane, storm closure, or insulating interlayer. Its use belongs to civilian winter transit and daywear, not severe-weather, sporting, ceremonial, or issued service clothing. Preservation follows from the mixed fibre and raised finish. Renée Dancause, Janet Wagner, and Jan Vuori, Canadian Conservation Institute, Caring for Textiles and Costumes, note that wool absorbs moisture, weakens when wet, can felt under moisture, heat, and mechanical action, and is vulnerable to clothes moth and carpet-beetle larvae; the same guidance identifies water, unsuitable humidity, light, abrasion, and poor support as major textile risks. For this coat, wet treatment could alter shell dimensions, crush or further felt the nap, and create differential movement against the viscose lining, while hanging without shoulder support could distort the broad upper body. The intended use was repeated cold-weather civilian day wear with layered torso coverage, hand-pocket access, and a neck closure adjustable by buttoning. Its material behavior combines the warmth and raised cohesion of a wool-rich face with the softer fall of a substantial viscose share and the low-friction movement of a viscose lining.
View full details